# Z-axis limit switch (left) Creality 2101030260 for 3D printers

**URL:** https://aio.lv/en/product--creality-2101030260--12267951
**Data updated:** 2026-04-16 14:14 (EEST)
**Category:** Office Equipment Accessories
**Manufacturer:** Creality
**Manufacturer code:** 2101030260
**EAN:** 6977726811446
**Warranty:** 2 Years
**Availability:** Available for order
**Price:** 19.49 €
**Prices and availability valid until:** 2026-08-14 23:59
**Price without VAT (21%):** 16.11 EUR
**Can be purchased by legal entities:** Yes (invoice)
**Buy:** https://aio.lv/en/product--creality-2101030260--12267951

## Delivery options

| Delivery method | Delivery time | Cost |
|---|---|---|
| Office pickup (2b. Kengaraga str., Riga, Latvia, LV-1063) | 12.08.2026 | free |
| Pickup points | 17.08.2026 | 1.89 EUR |
| Courier delivery to door | 17.08.2026 | 4.99 EUR |

## Summary description

Left-side Z-axis limit switch by Creality, model 2101030260, designed as a replacement or spare part for compatible Creality 3D printers. This mechanical endstop detects and signals the Z-axis home position to the printer controller, ensuring accurate bed leveling and safe axis movement. Suitable for maintenance and repair of failed or worn limit switches.

## Long description

The Z-axis limit switch (left) by Creality is a mechanical endstop intended as a replacement part for compatible Creality 3D printers. It detects the Z-axis home position and sends a clear electrical signal to the printer controller when the carriage or bed reaches the designated limit. Designed for left-side mounting on the Z-axis assembly, the switch supports accurate homing and contributes to consistent bed leveling and safe axis movement during print startup and maintenance operations.
Advantages
This Creality Z-axis limit switch provides a straightforward, mechanically reliable solution for detecting the Z-home position. Its compact form factor and standard mounting make it easy to install in compatible printer frames. As a discrete mechanical switch, it offers predictable electrical contacts and simple wiring, making it suitable for users performing routine repairs or replacing worn endstops without modifying control firmware or wiring logic.
Suitable for
 Replacing a failed or intermittent Z-axis endstop on compatible Creality 3D printers
 Spare-part inventory for repair shops or hobbyists working on Creality machines
 Routine maintenance when the original switch shows mechanical wear or inconsistent triggering
When it may not be suitable
This mechanical limit switch is intended for printers that accept standard mechanical endstops and left-side mounting; it may not fit machines that use optical, magnetic, or proprietary endstop designs. If your printer requires a different mounting orientation or an electronic type of sensor, this part will not function without appropriate mechanical adaptation or electrical interface changes.
Key specifications
 Type: mechanical micro switch endstop for Z-axis (left-side)
 Function: detects Z-home position and provides electrical contact signal to controller
 Mounting: left-side Z-axis assembly compatible with standard Creality frames
 Interface: standard three-pin or two-pin wiring compatible with typical endstop connectors (mechanical switch signal and ground/voltage as required)
 Construction: compact plastic housing with metal actuator lever and electrical contacts
How to use
Power off the printer and secure the machine before performing any replacement. Remove the access panels as needed to reach the left Z-axis endstop assembly. Disconnect the wiring harness from the existing switch, unfasten the mounting screws, and remove the old switch. Position the Creality replacement switch in the same orientation, fasten it using the original mounting points, and reconnect the wiring harness ensuring correct signal and ground pins. After installation, manually move the Z-axis to verify mechanical actuation and then power on the printer to perform a homing sequence and confirm correct triggering within printer firmware settings.
What to consider before purchase
 Verify that your printer uses a left-side mechanical Z-axis endstop and that the mounting points match
 Confirm electrical connector type and pinout compatibility with your printer's control board
 Ensure replacement of a mechanical switch is appropriate for your machine (not an optical or magnetic sensor)
Usage recommendations
Inspect and test the new switch after installation by performing homing and observing consistent trigger points; if necessary, adjust the mechanical stopper or firmware endstop offset rather than forcing mechanical alignment. Keep a spare switch on hand for quicker maintenance turnaround.

## FAQ

### How much does the Creality Z-axis limit switch (left) 2101030260 cost, and is it available for purchase?

The price is 19.49 € (valid at the time of publication and already includes all taxes). The item is available for order — 19 pcs. are in stock, and you can place your purchase right now with delivery across Latvia and Europe or choose pickup at the Riga collection point. We offer favorable purchase terms, including the option to split the payment into convenient monthly installments. Availability and price are updated in real time, so we recommend placing your order in advance.

### If I order this product today, when will I receive my order?

If you place your order today, delivery will be as fast and convenient as possible. You will be able to pick up your order on 12.08.2026 at the Riga pickup point or choose delivery across Latvia and Europe. We carefully inspect every purchase and pack it securely for safe transportation.

### What payment options are available?

AiO.lv offers several payment methods: Bank transfer. All transactions are 100% secure and encrypted.

### Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

### What is the warranty period?

All Creality products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized Creality service centers and through AiO.lv

### Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

### Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. More information about warranty service: https://aio.lv/en/warranty