# Limit switch for X-axis Creality model 2101030265 for 3D printers, spare part

**URL:** https://aio.lv/en/product--creality-2101030265--12267944
**Data updated:** 2026-04-16 14:14 (EEST)
**Category:** Office Equipment Accessories
**Manufacturer:** Creality
**Manufacturer code:** 2101030265
**EAN:** 6977726811408
**Warranty:** 2 Years
**Availability:** Available for order
**Price:** 19.49 €
**Prices and availability valid until:** 2026-08-14 23:59
**Price without VAT (21%):** 16.11 EUR
**Can be purchased by legal entities:** Yes (invoice)
**Buy:** https://aio.lv/en/product--creality-2101030265--12267944

## Delivery options

| Delivery method | Delivery time | Cost |
|---|---|---|
| Office pickup (2b. Kengaraga str., Riga, Latvia, LV-1063) | 12.08.2026 | free |
| Pickup points | 17.08.2026 | 1.89 EUR |
| Courier delivery to door | 17.08.2026 | 4.99 EUR |

## Summary description

X-axis limit switch (model 2101030265) by Creality — a replacement mechanical/endstop switch designed for Creality 3D printers. Used to detect the X-axis home position and stop axis motion, it serves as a spare part for maintenance or repairs. Compatible with printers that use the same Creality endstop form factor and wiring.

## Long description

The Creality X-axis limit switch (model 2101030265) is a mechanical endstop designed as a replacement part for Creality 3D printers. It detects the X-axis home position and stops motion when the carriage reaches the end of travel. The component follows Creality's common endstop form factor and wiring, making it suitable as a spare for maintenance, repairs, or when restoring correct axis homing behavior.
Advantages
This limit switch provides a straightforward mechanical solution for accurate X-axis homing and end-of-travel detection. Its standardized form factor and compatible wiring allow for direct replacement in printers that use Creality-style endstops. The simple, durable mechanical design reduces the need for calibration after swap, and the part is compact, enabling easy installation in confined carriage assemblies.
Suitable for
 Replacing a worn or faulty X-axis endstop on compatible Creality 3D printers
 Repairing printers after accidental damage to the original limit switch
 Maintenance kits for service technicians and hobbyists
 Restoring proper X-axis homing after intermittent or failed endstop behavior
When it may not be suitable
This mechanical limit switch is intended for printers that use the same Creality endstop form factor and wiring. It may not be compatible with printers that use different endstop shapes, mounting arrangements, or alternative electronic endstop types (such as optical or hall-effect sensors). If your printer uses a non-standard connector or a bespoke carriage mount, additional modification or adapter wiring could be required.
Key specifications
 Function: Mechanical X-axis endstop / limit switch for homing and end-of-travel detection
 Compatibility: Creality-style endstop form factor and wiring (used on many Creality 3D printers)
 Mounting: Compact form factor suitable for carriage-mounted installation
 Electrical: Standard mechanical switch contacts for connection to the printer mainboard
 Durability: Designed for repeated mechanical actuation typical in 3D printer use
How to use
Power off the printer and access the X-axis carriage to reach the existing limit switch. Remove the mounting screws and disconnect the switch connector from the mainboard, noting the wiring orientation. Install the Creality X-axis limit switch in the same mounting position, secure it with the original screws, and reconnect the wiring with the same orientation. Power on the printer and run an axis homing command to verify correct operation. If homing is reversed or fails, recheck connector orientation and mechanical alignment of the actuator or plunger.
What to consider before purchase
 Confirm your printer uses a Creality-style mechanical endstop form factor and connector
 Verify the physical mounting space and screw pattern on your X-axis carriage
 Check that your printer electronics expect a mechanical switch (not optical or hall sensor)
 Have basic tools ready: screwdriver set and, if needed, spare connector or wiring
Usage recommendations
Use the switch as a direct mechanical replacement and test homing after installation. Periodically inspect the actuator and wiring for wear or looseness and replace the switch if intermittent homing or contact failures occur.

## FAQ

### How much does the Creality X-axis limit switch 2101030265 cost, and is it available for purchase?

The price is 19.49 € (valid at the time of publication and already includes all taxes). The item is available for order — 16 pcs. are in stock, and you can place your purchase right now with delivery across Latvia and Europe or choose pickup at the Riga collection point. We offer favorable purchase terms, including the option to split the payment into convenient monthly installments. Availability and price are updated in real time, so we recommend placing your order in advance.

### If I order this product today, when will I receive my order?

If you place your order today, delivery will be as fast and convenient as possible. You will be able to pick up your order on 12.08.2026 at the Riga pickup point or choose delivery across Latvia and Europe. We carefully inspect every purchase and pack it securely for safe transportation.

### What payment options are available?

AiO.lv offers several payment methods: Bank transfer. All transactions are 100% secure and encrypted.

### Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

### What is the warranty period?

All Creality products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized Creality service centers and through AiO.lv

### Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

### Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. More information about warranty service: https://aio.lv/en/warranty