# Creality Y-axis Limit Switch HI model 2104010154 for 3D printers

**URL:** https://aio.lv/en/product--creality-2104010154--12267942
**Data updated:** 2026-04-16 14:14 (EEST)
**Category:** Office Equipment Accessories
**Manufacturer:** Creality
**Manufacturer code:** 2104010154
**EAN:** 6977726811385
**Warranty:** 2 Years
**Availability:** Available for order
**Price:** 19.49 €
**Prices and availability valid until:** 2026-08-14 23:59
**Price without VAT (21%):** 16.11 EUR
**Can be purchased by legal entities:** Yes (invoice)
**Buy:** https://aio.lv/en/product--creality-2104010154--12267942

## Delivery options

| Delivery method | Delivery time | Cost |
|---|---|---|
| Office pickup (2b. Kengaraga str., Riga, Latvia, LV-1063) | 13.08.2026 | free |
| Pickup points | 18.08.2026 | 1.89 EUR |
| Courier delivery to door | 18.08.2026 | 4.99 EUR |

## Summary description

Mechanical Y-axis limit (endstop) switch from Creality, model 2104010154 (HI). Designed for use in Creality and compatible 3D printers to detect Y-axis home position and enable precise homing, position safety and stall prevention. Typical replacement or spare part for printer control boards and motion systems.

## Long description

The Creality Y-axis Limit Switch HI model is a mechanical endstop designed to detect the Y-axis home position in Creality and compatible 3D printers. It provides a physical contact point for printer firmware to register the carriage or bed position, enabling accurate homing, position safety and prevention of axis overrun. This spare part is typically used as a direct replacement for worn or faulty Y-axis endstops on control boards and motion assemblies.
Advantages
This mechanical limit switch offers a simple and robust solution for Y-axis position detection. Its mechanical actuation requires no calibration in firmware beyond standard endstop settings, and it is compatible with commonly used Creality wiring and mounting points. The component is compact, reliable under repeated cycles, and serves as an economical spare part to restore correct homing behavior and improve motion safety in printers.
Suitable for
 Repairing or replacing a faulty Y-axis endstop in Creality and compatible 3D printers
 Restoring accurate homing and preventing bed or carriage overrun
 Use as a spare part for maintenance and long-term reliability of motion systems
When it may not be suitable
This mechanical switch is not suitable where non-contact or optical endstops are explicitly required for a specific upgrade, such as inductive or optical sensors used for silent or high-speed applications. It may also be incompatible with printer designs that use integrated or custom endstop assemblies with different mounting geometries or connector types.
Key specifications
 Type: Mechanical lever-actuated limit (endstop) switch
 Intended axis: Y-axis position detection
 Function: Normally closed or normally open contact depending on wiring (standard mechanical endstop behavior)
 Mounting: Compact form factor compatible with Creality-style endstop mounts (check printer mounting points)
 Durability: Designed for repeated mechanical actuation cycles typical in 3D printer use
How to use
Mount the switch in the Y-axis endstop location on the printer frame or carriage using the existing mounting holes or bracket. Connect the switch wires to the printer control board endstop pins, observing the board's required wiring configuration and polarity for normally open or normally closed operation. After installation, test the endstop in the printer's control interface or firmware by manually triggering the switch and verifying the printer recognizes the home signal. Adjust the lever orientation and mounting position if necessary to ensure reliable contact at the intended home location.
What to consider before purchase
 Confirm compatibility with your printer model and the physical mounting points for the Y-axis endstop
 Ensure the connector and wire length match your control board or plan to rewire/extend as needed
 Decide if a mechanical switch meets your needs or if a non-contact sensor would be preferable for your setup
Usage recommendations
For reliable operation, position the lever so the switch is consistently actuated at the exact home location; check and tighten mounting hardware periodically and avoid contaminating the switch mechanism with lubricant or debris. Verify endstop behavior in firmware after installation and perform a controlled homing move to confirm correct operation before printing.

## FAQ

### How much does the Creality Y-axis Limit Switch 2104010154 cost, and is it available for purchase?

The price is 19.49 € (valid at the time of publication and already includes all taxes). The item is available for order — 19 pcs. are in stock, and you can place your purchase right now with delivery across Latvia and Europe or choose pickup at the Riga collection point. We offer favorable purchase terms, including the option to split the payment into convenient monthly installments. Availability and price are updated in real time, so we recommend placing your order in advance.

### If I order this product today, when will I receive my order?

If you place your order today, delivery will be as fast and convenient as possible. You will be able to pick up your order on 13.08.2026 at the Riga pickup point or choose delivery across Latvia and Europe. We carefully inspect every purchase and pack it securely for safe transportation.

### What payment options are available?

AiO.lv offers several payment methods: Bank transfer. All transactions are 100% secure and encrypted.

### Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

### What is the warranty period?

All Creality products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized Creality service centers and through AiO.lv

### Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

### Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. More information about warranty service: https://aio.lv/en/warranty