# Thermistor Creality CR-200B PRO model 3103020133 for 3D printer temperature sensing

**URL:** https://aio.lv/en/product--creality-3103020133--10524078
**Data updated:** 2026-02-12 21:58 (EET)
**Category:** 3D Printer Consumables
**Manufacturer:** Creality
**Manufacturer code:** 3103020133
**Warranty:** 2 Years
**Availability:** Available for order
**Price:** 18.49 €
**Prices and availability valid until:** 2026-07-21 23:59
**Price without VAT (21%):** 15.28 EUR
**Can be purchased by legal entities:** Yes (invoice)
**Buy:** https://aio.lv/en/product--creality-3103020133--10524078

## Delivery options

| Delivery method | Delivery time | Cost |
|---|---|---|
| Office pickup (2b. Kengaraga str., Riga, Latvia, LV-1063) | 23.07.2026 | free |
| Pickup points | 28.07.2026 | 1.89 EUR |
| Courier delivery to door | 28.07.2026 | 4.99 EUR |

## Summary description

Replacement thermistor for Creality CR-200B PRO (model 3103020133). Designed for temperature sensing in 3D printer hotends or heated beds where compatible, it provides accurate thermal feedback to the printer controller. Suitable for maintenance and part replacement to restore reliable temperature measurement and maintain print quality. Install following manufacturer instructions.

## Long description

Replacement thermistor designed for Creality CR-200B PRO model 3103020133, intended for temperature sensing in compatible 3D printer hotends or heated beds. The component provides temperature feedback to the printer controller to enable accurate heater regulation and maintain consistent printing conditions. It is supplied as a direct replacement part for maintenance or repair to restore correct temperature measurement and support reliable print results when used according to the printer manufacturer’s installation instructions.
Advantages
This thermistor offers precise temperature sensing suitable for common FDM 3D printers and is manufactured to match the electrical and thermal characteristics expected by the Creality CR-200B PRO system. It is compact and designed for simple replacement, helping to reduce downtime during maintenance. The part supports stable thermal readings that contribute to consistent extrusion and layer adhesion when installed and calibrated correctly.
Suitable for
Replacing a faulty or worn thermistor in Creality CR-200B PRO hotend assemblies
Use in compatible heated beds where the same thermistor type is required
Routine maintenance to restore accurate temperature control and print quality
Repair tasks that require restoring correct temperature feedback to the controller
Key specifications
Type: Thermistor for temperature sensing in 3D printer heating elements
Compatibility: Designed to match Creality CR-200B PRO temperature sensing requirements
Form factor: Compact sensor assembly suitable for hotend or heated bed integration where compatible
Function: Provides analog temperature feedback for heater control and safety systems
Installation: Intended for direct replacement following manufacturer installation guidelines
How to use
Power off the printer and allow all hot components to cool before beginning replacement. Remove the defective thermistor from the hotend or bed following the Creality CR-200B PRO service instructions, taking care with wiring and connector orientation. Install the replacement thermistor in the same position and secure any mechanical clamps or insulation used by the original assembly. Reconnect wiring to the correct terminal on the control board and verify secure connections. After installation, power on the printer and confirm that temperature readings are present and stable in the firmware interface; perform a test heat to a low target temperature first to confirm proper operation.
Usage recommendations
Use this thermistor only in compatible assemblies and follow Creality’s guidance for placement and calibration. Verify thermistor readings against firmware expectations and run PID tuning or calibration procedures if instructed by the printer documentation. Replace damaged or frayed wiring and ensure connectors and insulation are intact to prevent measurement errors or electrical issues.

## FAQ

### How much does the Thermistor Creality CR-200B PRO 3103020133 cost, and is it available for purchase?

The price is 18.49 € (valid at the time of publication and already includes all taxes). The item is available for order — 5 pcs. are in stock, and you can place your purchase right now with delivery across Latvia and Europe or choose pickup at the Riga collection point. We offer favorable purchase terms, including the option to split the payment into convenient monthly installments. Availability and price are updated in real time, so we recommend placing your order in advance.

### If I order this product today, when will I receive my order?

If you place your order today, delivery will be as fast and convenient as possible. You will be able to pick up your order on 23.07.2026 at the Riga pickup point or choose delivery across Latvia and Europe. We carefully inspect every purchase and pack it securely for safe transportation.

### What payment options are available?

AiO.lv offers several payment methods: Bank transfer. All transactions are 100% secure and encrypted.

### Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

### What is the warranty period?

All Creality products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized Creality service centers and through AiO.lv

### Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

### Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. More information about warranty service: https://aio.lv/en/warranty