# Z-axis Left Stepper Motor for Creality 3D Printers, MPN 3204120244

**URL:** https://aio.lv/en/product--creality-3204120244--12267948
**Data updated:** 2026-04-16 14:14 (EEST)
**Category:** Office Equipment Accessories
**Manufacturer:** Creality
**Manufacturer code:** 3204120244
**EAN:** 6977726811149
**Warranty:** 2 Years
**Availability:** Available for order
**Price:** 35.49 €
**Prices and availability valid until:** 2026-08-14 23:59
**Price without VAT (21%):** 29.33 EUR
**Can be purchased by legal entities:** Yes (invoice)
**Buy:** https://aio.lv/en/product--creality-3204120244--12267948

## Delivery options

| Delivery method | Delivery time | Cost |
|---|---|---|
| Office pickup (2b. Kengaraga str., Riga, Latvia, LV-1063) | 13.08.2026 | free |
| Pickup points | 18.08.2026 | 1.89 EUR |
| Courier delivery to door | 18.08.2026 | 4.99 EUR |

## Summary description

Replacement Z-axis left stepper motor compatible with Creality 3D printers, identified by manufacturer part number 3204120244. Designed to drive the printer's Z-axis lead screw for accurate layer height control and stable vertical movement. Suitable as a spare part for maintenance or repairs to restore precise Z positioning and reduce layer shift.

## Long description

The Z-axis Left Stepper Motor for Creality 3D Printers is a replacement motor designed to drive the printer's Z-axis lead screw, providing controlled vertical movement and precise layer height positioning. It is intended as a spare part for Creality machines that require restoration of accurate Z movement and reduction of layer shifting during prints. The motor matches the mechanical and electrical characteristics expected for the left-side Z drive in compatible Creality models and is offered as a direct-fit component for maintenance or repair tasks.
Advantages
This replacement motor offers stable torque for consistent layer stacking and steady vertical motion under normal printing loads. It is engineered to integrate with existing Z-axis assemblies, enabling return to reliable Z positioning without major modifications. The motor's construction supports repeated start/stop cycles typical in layer-by-layer printing and is suitable for routine service work to restore original printing accuracy.
Suitable for
Repairing or replacing a worn or faulty left Z-axis stepper on compatible Creality 3D printers
Maintaining precise Z-axis movement to reduce layer shift and improve print consistency
Use as a spare part in service kits for Creality printers
Projects requiring a direct-fit replacement motor for the left-side Z drive
When it may not be suitable
This motor may not be suitable for non-Creality or heavily modified printer frames where mounting points, shaft dimensions, or connector types differ. It is not intended to change printer performance beyond restoring original specifications; using it as an upgrade without verifying electrical compatibility and firmware settings can cause issues. Consult technical documentation or compare physical and electrical characteristics before fitting to a different model.
Key specifications
Function: Stepper motor for Z-axis drive providing vertical positioning control
Application: Left-side Z lead screw drive on compatible Creality 3D printers
Performance characteristics: Designed for steady holding torque and repeatable stepping under typical FDM printing loads
Form factor: Replacement motor intended for direct installation in existing Z-axis assemblies
Electrical/Mechanical compatibility: Matches standard wiring and mounting arrangements used in supported Creality models (verify connector type and wiring before installation)
How to use
Turn off and unplug the printer before beginning any replacement procedure. Remove the build plate or covers as required to access the Z-axis motor mount. Disconnect the motor wiring from the controller board and unbolt the motor from its bracket, keeping track of fasteners. Install the replacement motor in the same orientation, secure mounting bolts, and reconnect wiring matching the original connector positions. Power up the printer and test Z-axis movement slowly, checking for correct direction, smooth travel, and absence of binding. If direction is reversed, adjust wiring or motor orientation according to the printer's service manual; recalibrate Z endstop and layer-zero height if necessary.
What to consider before purchase
Confirm mechanical mounting dimensions and shaft orientation match your printer's left Z-axis position
Verify connector type and wiring compatibility with your printer's mainboard
Ensure the motor's electrical characteristics are appropriate for your printer to avoid overcurrent or insufficient torque
Check that the replacement aligns with your printer model's service instructions to allow straightforward installation
Usage recommendations
Use this replacement motor in conjunction with routine maintenance: clean lead screws, lubricate linear rails, and verify motor driver current limits in firmware or driver hardware to achieve consistent Z performance and prevent overheating. After installation, run a calibration print and monitor layer adhesion and alignment to confirm successful replacement.

## FAQ

### How much does the Creality Z-axis Left Stepper Motor 3204120244 cost, and is it available for purchase?

The price is 35.49 € (valid at the time of publication and already includes all taxes). The item is available for order — 20 pcs. are in stock, and you can place your purchase right now with delivery across Latvia and Europe or choose pickup at the Riga collection point. We offer favorable purchase terms, including the option to split the payment into convenient monthly installments. Availability and price are updated in real time, so we recommend placing your order in advance.

### If I order this product today, when will I receive my order?

If you place your order today, delivery will be as fast and convenient as possible. You will be able to pick up your order on 13.08.2026 at the Riga pickup point or choose delivery across Latvia and Europe. We carefully inspect every purchase and pack it securely for safe transportation.

### What payment options are available?

AiO.lv offers several payment methods: Bank transfer. All transactions are 100% secure and encrypted.

### Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

### What is the warranty period?

All Creality products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized Creality service centers and through AiO.lv

### Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

### Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. More information about warranty service: https://aio.lv/en/warranty