# Printhead Cable for Creality 3D Printers, model 4006030061 (K2)

**URL:** https://aio.lv/en/product--creality-4006030061--12267960
**Data updated:** 2026-04-16 14:14 (EEST)
**Category:** Office Equipment Accessories
**Manufacturer:** Creality
**Manufacturer code:** 4006030061
**EAN:** 6977726811804
**Warranty:** 2 Years
**Availability:** Available for order
**Price:** 16.99 €
**Prices and availability valid until:** 2026-08-14 23:59
**Price without VAT (21%):** 14.04 EUR
**Can be purchased by legal entities:** Yes (invoice)
**Buy:** https://aio.lv/en/product--creality-4006030061--12267960

## Delivery options

| Delivery method | Delivery time | Cost |
|---|---|---|
| Office pickup (2b. Kengaraga str., Riga, Latvia, LV-1063) | 12.08.2026 | free |
| Pickup points | 17.08.2026 | 1.89 EUR |
| Courier delivery to door | 17.08.2026 | 4.99 EUR |

## Summary description

Replacement printhead cable for Creality 3D printers, model 4006030061 (K2). Designed to connect the printer mainboard to the hotend/printhead assembly, it ensures signal and power transmission for extrusion and temperature control. Suitable as a spare part for maintenance, repairs or upgrades of compatible Creality machines.

## Long description

Replacement printhead cable for Creality 3D printers, model 4006030061 (K2), designed to connect the printer mainboard to the hotend or printhead assembly. This cable transmits power and control signals required for filament extrusion and temperature sensing, providing a direct electrical link between the controller and the moving printhead. It is intended as a maintenance or repair part for compatible Creality machines and can be used when the original cable shows wear, intermittent connection, or after upgrades to hotend assemblies.
Advantages
The printhead cable provides a reliable electrical connection with wiring optimized for signal integrity and power delivery to the hotend. It is configured to match Creality hotend assemblies, reducing the need for custom wiring or soldering during replacement. Using a purpose-made cable simplifies repairs and helps maintain consistent extrusion and temperature control by minimizing intermittent contacts and electrical noise.
Suitable for
Replacing a damaged or worn printhead/hotend cable on compatible Creality 3D printers
Routine maintenance to restore reliable extrusion and temperature feedback
Repairing intermittent connection or wiring faults affecting print quality
Upgrading or swapping hotend assemblies where a matching cable is required
When it may not be suitable
This cable is specifically designed to match Creality hotend and mainboard pinouts; it may not be compatible with non-Creality printers or third-party hotends that use different connector types or wiring assignments. Incorrect use with incompatible hardware can cause improper signal routing or damage to components. Verify compatibility before installation.
Key specifications
Function: electrical connection between printer mainboard and printhead/hotend for power and signal transmission
Application: replacement/spare part for compatible Creality 3D printers
Cable type: multi-conductor assembly with connectors matched to Creality hotend and board interface
Typical signals carried: heater power, thermistor/temperature sensor, stepper/encoder or fan power/control where applicable
Use environment: internal moving axis/harness routing on desktop FDM 3D printers
How to use
Power off the printer and disconnect it from the mains before handling internal wiring. Access the printhead assembly according to the printer service manual, detach the worn cable from the mainboard and hotend connectors, and install the replacement cable ensuring correct orientation and full seating of each connector. Route the cable along the same path as the original, using any cable guides or clips to prevent abrasion and to allow free movement of the X/Y carriage. After reconnection, inspect connectors and secure any strain relief, then power on the printer and verify heater and thermistor readings in the control interface before initiating a test print.
What to consider before purchase
Confirm that the cable pinout and connector types match your specific Creality printer model and hotend assembly
Check the required cable length and routing in your printer to ensure sufficient slack for carriage motion
Ensure you have basic tools and knowledge for safe disassembly and reconnection of printer wiring
Usage recommendations
Install this replacement cable following the manufacturer's service instructions, verify thermistor and heater readings in the printer menu after installation, and use proper cable routing and strain relief to maximize service life and maintain reliable extrusion and temperature control.

## FAQ

### How much does the Creality printhead cable 4006030061 (K2) cost, and is it available for purchase?

The price is 16.99 € (valid at the time of publication and already includes all taxes). The item is available for order — 1 pcs. are in stock, and you can place your purchase right now with delivery across Latvia and Europe or choose pickup at the Riga collection point. We offer favorable purchase terms, including the option to split the payment into convenient monthly installments. Availability and price are updated in real time, so we recommend placing your order in advance.

### If I order this product today, when will I receive my order?

If you place your order today, delivery will be as fast and convenient as possible. You will be able to pick up your order on 12.08.2026 at the Riga pickup point or choose delivery across Latvia and Europe. We carefully inspect every purchase and pack it securely for safe transportation.

### What payment options are available?

AiO.lv offers several payment methods: Bank transfer. All transactions are 100% secure and encrypted.

### Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

### What is the warranty period?

All Creality products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized Creality service centers and through AiO.lv

### Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

### Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. More information about warranty service: https://aio.lv/en/warranty