# Replacement electronics control board for Dedra workshop vacuum DED6604 (MPN 15828-uniw)

**URL:** https://aio.lv/en/product--dedra-15828-uniw--12268433
**Data updated:** 2026-04-16 14:14 (EEST)
**Category:** Vacuum cleaners
**Manufacturer:** Dedra
**Manufacturer code:** 15828-uniw
**EAN:** 5900315065471
**Warranty:** 2 Years
**Availability:** Available for order
**Price:** 58.49 €
**Prices and availability valid until:** 2026-07-22 23:59
**Price without VAT (21%):** 48.34 EUR
**Can be purchased by legal entities:** Yes (invoice)
**Buy:** https://aio.lv/en/product--dedra-15828-uniw--12268433

## Delivery options

| Delivery method | Delivery time | Cost |
|---|---|---|
| Office pickup (2b. Kengaraga str., Riga, Latvia, LV-1063) | 16.07.2026 | free |
| Pickup points | 21.07.2026 | 1.89 EUR |
| Courier delivery to door | 21.07.2026 | 4.99 EUR |

## Summary description

Replacement electronics control board designed for Dedra workshop/industrial vacuum model DED6604. This spare part restores control and electronic functions of the vacuum, ensuring correct operation of power switching and electronic modules. Suitable for repair or maintenance of Dedra DED6604 units; recommended for technicians and service centers performing component-level replacements.

## Long description

Replacement electronics control board for Dedra workshop vacuum DED6604 is a dedicated spare part designed to restore electronic control functions in Dedra DED6604 workshop and industrial vacuum units. The board replaces faulty control electronics responsible for power switching, input/output signals and module coordination to bring the vacuum back to expected operational state. This component is intended for repair or maintenance work performed at component level and is suitable for service technicians and authorised repair centres working on Dedra workshop vacuums.
Advantages
The control board is manufactured to match the functional layout and connector interfaces of the original Dedra DED6604 electronics, which helps ensure compatibility with the vacuum's existing wiring harness and sensors. Using a dedicated replacement board reduces diagnostic time compared with full-unit replacement and can restore proper power management, on/off switching and response to control inputs. The spare part is a focused solution that allows targeted repairs and can extend the service life of the vacuum without altering mechanical components.
Suitable for
 Repairing Dedra DED6604 workshop or industrial vacuum units with failed or unstable electronics
 Service centres and technicians performing component-level maintenance and electronic module replacement
 Maintenance programmes aiming to avoid full machine replacement by replacing only faulty control electronics
When it may not be suitable
This replacement control board is intended specifically for the electronic systems of the Dedra DED6604 vacuum. It may not be suitable if the vacuum’s mechanical components (motor, suction housing, filters) are worn or damaged beyond repair, or if multiple unrelated faults exist that cannot be resolved by replacing the control board alone. Compatibility should be verified for units that have been previously modified or retrofitted with non-standard parts.
Key specifications
 Function: electronic control board for power switching and control signal management
 Intended device: workshop/industrial vacuum model with matching control interface
 Interfaces: connector layout compatible with original Dedra DED6604 wiring harness (power, control inputs/outputs)
 Form factor: board designed to fit the original mounting points and housing footprint
 Intended users: technicians and repair centres performing component-level replacements
How to use
Installation requires basic electronics and mechanical skills: disconnect the vacuum from mains power, open the housing following the manufacturer’s safety guidance, and locate the existing control board. Carefully document connector positions and take photos if needed to ensure correct reassembly. Remove mounting screws and connectors, replace the faulty board with the new unit, secure it to the original mounting points, reconnect wiring harnesses according to the documented layout, and reassemble the housing. After installation, perform a functional test of power on/off, any control switches, and safety interlocks before returning the vacuum to service.
What to consider before purchase
 Confirm that the vacuum model is Dedra DED6604 and that the control board layout matches the unit to be repaired
 Ensure faults are limited to electronic control functions and not caused by motor failure, wiring damage, or mechanical wear
 Verify technician capability or service centre availability for safe disassembly and firmware or configuration steps if required
Usage recommendations
Use a static-free workstation and appropriate tools when handling the control board. Verify all connectors are fully seated and insulated, test the vacuum in a controlled environment after replacement, and keep original mounting hardware and any removed components to facilitate correct reassembly. If uncertain about diagnosis or installation, consult a qualified service technician experienced with Dedra workshop vacuums.

## FAQ

### How much does the Dedra DED6604 electronics control board cost, and is it available for purchase?

The price is 58.49 € (valid at the time of publication and already includes all taxes). The item is available for order — 20 pcs. are in stock, and you can place your purchase right now with delivery across Latvia and Europe or choose pickup at the Riga collection point. We offer favorable purchase terms, including the option to split the payment into convenient monthly installments. Availability and price are updated in real time, so we recommend placing your order in advance.

### If I order this product today, when will I receive my order?

If you place your order today, delivery will be as fast and convenient as possible. You will be able to pick up your order on 16.07.2026 at the Riga pickup point or choose delivery across Latvia and Europe. We carefully inspect every purchase and pack it securely for safe transportation.

### What payment options are available?

AiO.lv offers several payment methods: Bank transfer, Bank cards on-line, Apple Pay, Google Pay. All transactions are 100% secure and encrypted.

### Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

### What is the warranty period?

All Dedra products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized Dedra service centers and through AiO.lv

### Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

### Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. More information about warranty service: https://aio.lv/en/warranty

## Image

https://aio.lv/img/cache/product/12268433/68186377_large.webp