# Power Supply INNE URZ2298 — 12V DC 1.5A Switch Mode Adapter with 2.1/5.5 mm Connector

**URL:** https://aio.lv/en/product--inne-urz2298--11678272
**Data updated:** 2026-04-24 17:44 (EEST)
**Category:** Portable Device Chargers
**Manufacturer:** INNE
**Manufacturer code:** URZ2298
**EAN:** 5901890008471
**Warranty:** 2 Years
**Availability:** Out of stock

## Summary description

INNE URZ2298 is a switch-mode DC power supply delivering 12V at up to 1.5A. Designed for devices requiring a stabilized 12V source, it features a standard 2.1/5.5 mm barrel connector for compatibility with routers, CCTV cameras, LED strips, and small electronics. Provides short-circuit and overload protection and efficient conversion suited for continuous use.

## Long description

INNE URZ2298 is a switch-mode DC power supply that provides a stabilized 12V output at up to 1.5A. The adapter uses a common 2.1/5.5 mm barrel connector and is intended for powering small electronics, network devices, CCTV cameras, LED strips and other equipment that require a steady 12V DC source. The design includes short-circuit and overload protection and efficient conversion for continuous or long-term operation.
Advantages
The adapter delivers a regulated 12V output with a maximum current of 1.5A, offering stable voltage for connected devices. Its switch-mode design ensures higher efficiency and lower heat generation compared with unregulated supplies of similar size. A standard 2.1/5.5 mm barrel connector provides wide compatibility with common consumer and surveillance equipment. Built-in short-circuit and overload protection helps reduce the risk of damage to both the adapter and the connected device.
Suitable for
Routers, modems and small network switches that accept 12V DC input
CCTV cameras and surveillance modules requiring up to 1.5A
Low-power LED strips and LED controllers designed for 12V
Small electronic devices and development boards that use a 2.1/5.5 mm barrel connector
When it may not be suitable
This adapter provides up to 1.5A of current; devices that require higher currents or peak loads above this rating are not suitable without an intermediate power management solution. It is not intended for use with products that require different connector types, different voltages, or specialized power supplies (for example, certain industrial equipment or devices that need isolated outputs).
Key specifications
Output voltage: 12V DC
Maximum output current: 1.5A
Connector type: 2.1/5.5 mm barrel
Supply type: switch-mode (SMPS)
Protections: short-circuit and overload protection
Intended use: continuous operation for small electronics and surveillance devices
How to use
Connect the adapter to an appropriate AC mains outlet using the attached power cord, then plug the 2.1/5.5 mm barrel connector into the device’s DC input jack, ensuring correct polarity. Verify that the device’s required voltage and current do not exceed 12V and 1.5A respectively. Power the adapter on and check that the connected device operates normally. If the adapter or device becomes unusually hot or if protection trips, disconnect and inspect for faults.
What to consider before purchase
Confirm that the target device requires 12V and draws no more than 1.5A under expected load.
Ensure the 2.1/5.5 mm barrel connector matches the device’s jack and polarity.
Check mains voltage compatibility for your region if the product supports multiple input voltages.
Usage recommendations
Use the adapter in a well-ventilated area and avoid covering it during continuous operation. For devices with higher startup currents, allow a margin between the device’s peak demand and the adapter’s 1.5A rating. If in doubt about compatibility, consult the device manufacturer’s power requirements before use.

## FAQ

### What payment options are available?

AiO.lv offers several payment methods: Bank transfer. All transactions are 100% secure and encrypted.

### Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

### What is the warranty period?

All INNE products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized INNE service centers and through AiO.lv

### Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

### Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. More information about warranty service: https://aio.lv/en/warranty

## Image

https://aio.lv/img/cache/product/11678272/67006491_large.webp