# Concrete screw Koelner/Rawlplug R-LX M6 7.5x60 mm conical head, zinc plated (R-LX-06X060-CS-ZP)

**URL:** https://aio.lv/en/product--koelnerrawlplug-r-lx-06x060-cs-zp--12363480
**Data updated:** 2026-04-26 18:52 (EEST)
**Category:** Home & DIY Accessories
**Manufacturer:** Koelner/Rawlplug
**Manufacturer code:** R-LX-06X060-CS-ZP
**EAN:** 5906675442488
**Warranty:** 2 Years
**Availability:** Out of stock

## Summary description

Koelner/Rawlplug R-LX concrete screw M6, 7.5x60 mm with a conical (countersunk) head and electro-galvanized zinc coating. Designed for anchoring and fastening into solid concrete and masonry where a flush finish is required. Suitable for structural and non-structural fixings such as rails, brackets, frames and installations requiring mechanical load-bearing fasteners.

## Long description

Koelner/Rawlplug R-LX concrete screw M6 7.5x60 mm with a conical (countersunk) head and zinc electroplated finish is a mechanical fastener designed for direct anchoring into solid concrete and masonry. The countersunk head allows the screw to sit flush with the fixed element or substrate surface, providing a neat finish for installations where surface clearance is important. The zinc plated coating offers basic corrosion protection suitable for interior and covered exterior applications.
Advantages
The concrete screw provides immediate mechanical load transfer without the need for chemical adhesives or expansion anchors, allowing for quick installation and removal. Its conical head gives a flush appearance after installation, which is useful for mounting rails, brackets and frames where a recessed head is required. The electro-galvanized zinc layer reduces corrosion risk in standard environments and simplifies handling and storage.
Suitable for
Anchoring rails, brackets and light frames to solid concrete and masonry
Fixing non-structural and certain structural elements where mechanical screw anchorage is allowed
Applications requiring a countersunk, flush finish
Interior installations and covered outdoor locations with limited corrosion exposure
When it may not be suitable
This concrete screw is not intended for use in hollow or perforated masonry where a through-threaded mechanical anchor cannot engage solid material. It is not recommended for highly corrosive environments or for permanent outdoor installations exposed to heavy weather without additional protective measures. For heavy structural loads or seismic applications, specify anchors validated for those conditions and follow engineering guidance.
Key specifications
Screw diameter: M6
Shank/drive length: 60 mm overall length; effective embedment depends on installation depth
Head type: conical / countersunk head for flush mounting
Surface finish: electro-galvanized zinc coating for basic corrosion resistance
Material: steel fastener suitable for mechanical anchoring into solid concrete and masonry
How to use
Drill a hole in the concrete or masonry using the recommended drill diameter and the correct drill type (masonry/concrete carbide bit). Clean the hole of dust and debris before insertion. Position the fixture and drive the screw into the hole with an appropriate driver or socket until the head sits flush with the fixture. Do not overtighten; stop when the head is seated and the fixture is secure. For removal, reverse the driving direction and extract the screw.
What to consider before purchase
Confirm substrate is solid concrete or suitable dense masonry rather than hollow blockwork
Check required embedment depth and load capacity against application needs
Assess environmental exposure to determine if zinc plating provides adequate corrosion protection
Verify compatibility of the screw head size and drive with your tools and fixture countersink
Usage recommendations
Use a clean, properly sized carbide masonry drill bit and blow or brush out drilled holes before insertion. For outdoors or corrosive environments select higher-corrosion-grade anchors or additional protective coatings. Follow manufacturer's recommended drill diameter and embedment depth for reliable performance.

## FAQ

### What payment options are available?

AiO.lv offers several payment methods: Bank transfer. All transactions are 100% secure and encrypted.

### Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

### What is the warranty period?

All Koelner/Rawlplug products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized Koelner/Rawlplug service centers and through AiO.lv

### Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

### Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. More information about warranty service: https://aio.lv/en/warranty

## Image

https://aio.lv/img/cache/product/12363480/68542980_large.webp