# Duplex patch cable Singlemode OS2 9/125 SC(APC)-SC(APC) LS0H 1 m

**URL:** https://aio.lv/en/product--oem-dpx-09-scapcscapc-1--12394514
**Data updated:** 2026-04-26 22:21 (EEST)
**Category:** Network Cables
**Manufacturer:** OEM
**Manufacturer code:** DPX-09-SCAPC/SCAPC-1
**EAN:** 10101575
**Warranty:** 2 Years
**Availability:** Out of stock

## Summary description

Duplex singlemode patch cable OS2 (9/125) with SC(APC) connectors on both ends and LS0H jacket. Designed for fiber optic links requiring low loss and back reflection, it provides two optical channels in a single 1 m cable for connections between equipment, patch panels and distribution frames in telecom and datacom environments.

## Long description

Duplex patch cable Singlemode OS2 9/125 SC(APC)-SC(APC) LS0H 1 m is a 1 metre duplex singlemode fiber assembly with SC(APC) connectors on both ends and a low-smoke zero-halogen (LS0H) jacket. It offers two independent optical channels within a single cable for short interconnects between active equipment, patch panels and distribution frames in telecom and datacom installations. The OS2 9/125 singlemode fibre core is intended for long wavelength transmission with low attenuation and stable performance in typical indoor and controlled-environment routing.
Advantages
The cable combines SC(APC) angled physical contact connectors, which reduce back reflection, with a 9/125 OS2 singlemode profile for low insertion loss over singlemode links. The LS0H outer jacket reduces smoke and toxic gas emission in case of fire, making it suitable for indoor, commercial and managed data centre spaces. Being a duplex assembly, it provides transmit and receive channels in a compact side-by-side format that simplifies routing in patch panels and equipment ports.
Suitable for
 Interconnection between switches, routers and optical transceivers in telecom and datacom racks
 Patch panel to equipment links in data centres and server rooms
 Optical links where low back reflection is required, e.g. with sensitive transceivers or analog RF-over-fiber
 Indoor cabling runs in office buildings, carrier rooms and managed facilities
When it may not be suitable
This duplex Singlemode OS2 cable is not intended for multimode systems or networks designed for OM-series multimode fibre; using it in multimode ports will cause high loss and mismatch. It is also not intended for harsh outdoor burial or direct-exposure installations unless additional outdoor-rated armouring or conduits are employed. For very long backbone runs beyond standard singlemeter patching, verify link budget and attenuation requirements before use.
Key specifications
 Fibre type: Singlemode, OS2, 9/125 µm core/cladding
 Connector type: SC(APC) to SC(APC), duplex
 Cable length: 1 metre
 Jacket material: LS0H (low smoke zero halogen)
 Features: Angled Physical Contact (APC) connectors for low back reflection; two optical channels in duplex format
How to use
Prepare both ends by inspecting connectors for dust and contamination; clean with appropriate fiber cleaning tools if necessary. Route the duplex cable between the two equipment ports or patch panel ports, taking care to avoid sharp bends and tension beyond manufacturer recommendations. Insert the SC(APC) connectors into matching APC receptacles until they click or seat fully; ensure TX and RX channels are connected correctly according to equipment labelling. Secure excess cable to avoid tension and maintain bend radii during operation.
What to consider before purchase
 Confirm that your equipment and patch panels have SC(APC) receptacles and require angled-polish connectors
 Verify that singlemode OS2 fibre is appropriate for your network and not multimode (OM) compatible only
 Check required cable length and whether indoor LS0H jacketing meets site fire and safety codes
 Ensure connector gender/polarity and duplex orientation match your installation needs
Usage recommendations
Use fiber cleaners and inspection microscopes to maintain low insertion loss; avoid repeated mating cycles beyond connector ratings and route the cable with minimum bend radius in mind. For permanent or outdoor installations, consider using protective conduits or outdoor-rated assemblies.

## FAQ

### What payment options are available?

AiO.lv offers several payment methods: Bank transfer. All transactions are 100% secure and encrypted.

### Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

### What is the warranty period?

All OEM products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized OEM service centers and through AiO.lv

### Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

### Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. More information about warranty service: https://aio.lv/en/warranty

## Image

https://aio.lv/img/cache/product/12394514/68509274_large.webp