# Power adapter cable ShiverPeaks BS09-07035 — IEC C14 to CEE 7/3, 1 mm² conductor, for UPS, 2 m

**URL:** https://aio.lv/en/product--shiverpeaks-bs09-07035--12272213
**Data updated:** 2026-04-26 18:45 (EEST)
**Category:** Computer Component Accessories
**Manufacturer:** ShiverPeaks
**Manufacturer code:** BS09-07035
**EAN:** 4017538152213
**Warranty:** 2 Years
**Availability:** Out of stock

## Summary description

ShiverPeaks BS09-07035 is a 2 m power adapter cable with an IEC C14 male connector to a CEE 7/3 (Schuko) plug and 1 mm² conductor cross-section. Designed for UPS and power distribution in IT and AV equipment, it provides a reliable connection between devices with IEC C14 inlet and European mains sockets. Suitable for rack equipment, servers, and workstations.

## Long description

ShiverPeaks BS09-07035 is a 2 m adapter power cable that connects devices with an IEC C14 inlet to a European CEE 7/3 (Schuko) mains socket. The cable features a 1 mm² conductor cross-section and is intended primarily for use with UPS units, rack equipment, servers and workstations where a secure mains feed is required. Its straight design and standard connector types make it suitable for replacing or extending power connections in IT and AV installations.
Advantages
The cable combines a standard IEC C14 male connector with a CEE 7/3 (Schuko) plug and a 1 mm² conductor to provide a reliable, low-resistance connection for short-distance power distribution. With a 2 m length it balances reach and cable management in racks or under desks. Designed for use with uninterruptible power supplies and similar equipment, it supports stable mains delivery to sensitive electronics without adding unnecessary bulk.
Suitable for
 Connecting UPS output sockets to European mains outlets
 Powering rack-mounted servers and network devices with IEC C14 inlets
 Supplying workstations, desktop computers and AV equipment
 Temporary or semi-permanent power routing in IT rooms and offices
When it may not be suitable
This cable is not intended for long-distance mains distribution or for applications that require higher conductor cross-sections for increased current capacity. For heavy-duty equipment drawing high current or for permanent fixed wiring installations, a cable with a larger conductor cross-section and an appropriate connector type should be chosen. The 2 m length may be insufficient where greater separation between devices and sockets is required.
Key specifications
 Connector A: IEC C14 (male)
 Connector B: CEE 7/3 (Schuko) plug
 Cable length: 2 m
 Conductor cross-section: 1 mm²
 Primary use: UPS, IT and AV equipment power connection
How to use
Insert the IEC C14 end into the corresponding inlet on the UPS, server or device, and plug the CEE 7/3 Schuko end into a properly rated European mains socket. Ensure the socket and circuit can supply the device's rated current and that any protective earth connection is intact. Route the cable to avoid sharp bends, pinching points and heat sources. Disconnect power before performing maintenance or changing connections.
What to consider before purchase
 Verify that the target device has an IEC C14 inlet compatible with the cable.
 Confirm the 1 mm² conductor cross-section meets the current requirements of your equipment.
 Measure the required length to ensure 2 m is sufficient for your setup and cable routing.
 Check local electrical regulations for mains connections and earthing requirements.
Usage recommendations
Use this adapter cable for short runs between UPS units or equipment and nearby wall sockets, keep connections dry and secure, and replace the cable if insulation shows damage or if connectors become loose to maintain reliable power delivery.

## FAQ

### What payment options are available?

AiO.lv offers several payment methods: Bank transfer. All transactions are 100% secure and encrypted.

### Can this product be purchased for a company (with VAT)?

Yes. AiO.lv works with legal entities in Latvia and across Europe. The product price already includes VAT. For certain product categories, as well as for companies from other EU countries with a valid VAT number, a 0% VAT rate may apply. We issue the invoice immediately after the order is placed, support electronic BIS invoices, and automatically generate all necessary accounting documents. You can complete the purchase for a company online — simply select the company profile and choose bank transfer as the payment method during checkout.

### What is the warranty period?

All ShiverPeaks products come with an official 2 Years warranty. It covers all manufacturing defects and malfunctions that may occur during use. The warranty is valid at all authorized ShiverPeaks service centers and through AiO.lv

### Can the product be returned after purchase?

Yes, you can return the product within 14 days of purchase if you bought it as a consumer (not a legal entity). Returns are possible without giving any reason — the main condition is that the product retains its original appearance and full set of accessories. We will make the process as simple and convenient as possible: just contact our customer support team, and we will help you arrange the return.

### Where should I contact for warranty service?

For warranty-related questions you can contact the AiO.lv (SIA VSPRO) customer support team. More information about warranty service: https://aio.lv/en/warranty

## Image

https://aio.lv/img/cache/product/12272213/68191465_large.webp