Product specification ACT 150 m Multimode 50/125 OM3 Indoor/Outdoor Fiber Optic Cable with 4x LC Connectors

Description
The ACT 150 m Multimode 50/125 OM3 Indoor/Outdoor Fiber Optic Cable is a pre-terminated 4-way networking solution equipped with 4x LC connectors on both ends. Designed for high-speed data transmission, this halogen-free LSZH cable combines indoor and outdoor versatility with robust physical protection, making it an efficient choice for modern enterprise environments, data centers, and campus backbones.
Advantages
This pre-terminated fiber optic cable significantly reduces installation time by up to 80 percent, eliminating the need to invest in expensive splicing and testing equipment. Every assembly is produced and tested in a clean room environment, featuring factory-attached connectors polished to a UPC standard. Each cable includes an individual attenuation test report for insertion loss, ensuring dependable optical performance right out of the box. During installation, the vulnerable connectors and fan-out sections are fully safeguarded inside a compact transparent protective tube with a drawbar eye that withstands up to 350N of pulling force.
Suitable for
- Connecting two separate buildings on a single site
- Installing high-speed links between different floors in a building
- Linking various rooms within an enterprise network
- Horizontal and vertical routing in indoor and outdoor building infrastructures
When it may not be suitable
This multimode OM3 cable is not designed for long-distance telecommunications where single-mode fiber is strictly required. Additionally, pulling the cable through conduits with extremely tight bends or pathways smaller than the protective tube diameter may exceed the physical tolerances of the assembly.
Key specifications
- Cable length: 150 m
- Fiber optic type: OM3 multimode
- Core diameter: 50/125 µm
- Connector type: 4x LC Male to 4x LC Male
- Connector polish type: UPC
- Jacket material: Halogen-free LSZH
- Average attenuation: 0.1 dB
- Maximum pulling force: 350N
- Protective tube diameter: 18 mm
- CPR Euroclass compliance: Dca
- Color: Black
How to use
Unpack the cable carefully and inspect the protective tubes covering the connectors on both ends. Utilize the integrated drawbar eye and protective hose to pull the cable through conduits or cable trays, ensuring the maximum pulling force of 350N is not exceeded. Once routed to the destination points, remove the protective tubes and connect the LC plugs directly to compatible network ports. Scan the QR code printed on the cable for quick access to detailed installation instructions and guidelines.
What to consider before purchase
- Verify that the 150-meter length matches the exact distance required for your installation route
- Confirm compatibility with your existing network hardware supporting OM3 multimode LC connections
- Check that conduit diameters along the intended path can accommodate the 18 mm protective installation tube
Usage recommendations
Always adhere to the specified bending radii and pulling tension limits during installation to preserve optical integrity. Keep connectors clean and free from dust before insertion, and refer to the individual test report for baseline attenuation metrics.
Specifications
- Operating temperature (T-T):
- -20 - 70
- Cable length:
- 150 m
- Product colour:
- Black
- Connector 1:
- 4x LC
- Connector 2:
- 4x LC
- Cable diameter:
- 6.5 mm
- Insertion loss:
- 0.1 dB
- Fiber mode structure:
- Multi-mode
- Core diameter:
- 50 µm
- Cladding diameter:
- 125 µm
- Connector 1 gender:
- Male
- Connector 2 gender:
- Male
- Quantity per pack:
- 1 pc(s)
- Harmonized System (HS) code:
- 85447000
- Fibre optic type:
- OM3
- Return loss:
- 35 dB
- Connector polish type:
- UPC