Product specification Motion detector Bosch ISC-BPR2-WP12 wired white, range 12 m, 9–15 V, 150–2000 MHz

Description
Bosch ISC-BPR2-WP12 is a wired passive infrared (PIR) motion detector designed for intrusion detection and perimeter monitoring. The compact white unit measures 105×61×44 mm and delivers a maximum detection range of 12 m with Wall-to-Wall coverage across a 12 m × 12 m area. It operates from 9–15 V and communicates over 150–2000 MHz frequencies while drawing 100 mA during active operation and approximately 10 mA in standby. The device is intended for indoor and sheltered outdoor installations and includes selectable pet‑friendly settings to reduce false alarms caused by animals up to 20 kg.
Advantages
The detector uses dual Fresnel lenses to create a high-density 77‑zone, 7‑layer pattern that improves sensitivity and spatial resolution. Built-in dynamic temperature compensation maintains detection performance across varying environmental conditions. Flexible mounting height options require no detector adjustments, and the self-locking enclosure with integrated bubble level simplifies and speeds up installation. A selectable lookdown lens adds three additional lookdown zones to help detect intruders close to the device while minimizing false triggers from pets.
Suitable for
- Indoor rooms such as offices, hallways, and utility areas
- Sheltered outdoor perimeters like covered porches and garages
- Residential installations where pets are present (up to 20 kg)
- Commercial properties requiring wall-to-wall intruder coverage
Key specifications
- Detection technology: Dual Fresnel lens PIR (passive infrared)
- Maximum detection range: 12 m (Wall-to-Wall coverage 12 m × 12 m)
- Field pattern: 77 zones, 7 layers with selectable lookdown zones
- Operating voltage: 9–15 V DC
- Current consumption: 100 mA active, ~10 mA standby
- Frequency range: 150–2000 MHz (operational communication range)
- Housing dimensions: 105 × 61 × 44 mm
- Mounting: Wall mount with flexible height options; integrated bubble level
- Environmental suitability: Indoor and sheltered outdoor use; dynamic temperature compensation
- Pet handling: Selectable pet‑friendly mode for animals up to 20 kg
How to use
Install the detector on a stable wall at a recommended mounting height according to site requirements, using the integrated bubble level to ensure correct alignment. Connect the unit to a compatible alarm control panel or security system using the specified 9–15 V DC supply and appropriate wiring for signal transmission. Configure the pet‑friendly option if animals are present and verify the lookdown zones where close-range detection is needed. After power-up, perform a walk‑test across the protected area to confirm coverage and adjust system sensitivity or zone assignments in the control panel if required.
Usage recommendations
Position the sensor to avoid direct exposure to HVAC vents, reflective surfaces, or large glass areas that can cause false triggers. For outdoor‑facing installations choose a sheltered location to prevent direct rain or strong drafts from affecting performance. Regularly test the detector and clean the lens area to maintain reliable detection over time.
Specifications
- Dimensions (WxDxH):
- 105 x 61 x 44
- Power consumption (typical):
- 2.5 W
- Operating temperature (T-T):
- -30 - 55
- Input voltage:
- 9 - 15
- Standby current:
- 10 mA
- Connectivity technology:
- Wired
- Product colour:
- White
- Operating frequency:
- 150 - 2000
- Maximum range:
- 12 m
- Power consumption:
- 100 mA