Product specification Drill Bit FANAR VHM solid carbide Ø6.60 mm, 64/101 mm flute/overall length

Description
FANAR VHM solid carbide drill bit Ø6.60 mm with a flute length of 64 mm and an overall length of 101 mm is a precision cutting tool intended for demanding metalworking tasks. The solid carbide construction delivers rigidity and wear resistance required for repeated drilling in hard materials. The geometry and finish are designed for stable chip evacuation and consistent hole quality when used in CNC machines and drill presses.
Advantages
This drill bit offers high dimensional stability and prolonged tool life due to its solid carbide composition. The carefully formed cutting edges provide accurate centring and low runout, resulting in clean holes and repeatable results. Its flute design supports efficient chip removal to reduce heat build-up and minimize the need for rework.
Suitable for
- Drilling steel and alloy steels
- Working with castings and hardened materials within recommended parameters
- Use in CNC machining centres and industrial drill presses
- Applications requiring precise hole diameter and straightness
When it may not be suitable
This solid carbide drill bit is not intended for large-diameter drilling or applications where extensive flexibility is required; carbide is brittle compared with high-speed steel and can chip or fracture under heavy side loads or shock. It may also be less economical for occasional hobby use where tool cost and fragility outweigh performance benefits.
Key specifications
- Material: solid carbide (tungsten carbide)
- Cutting diameter: 6.60 mm
- Flute length: 64 mm
- Overall length: 101 mm
- Intended use: drilling in metals and cast materials
How to use
Mount the drill bit securely in an appropriate chuck or tool holder, ensuring correct runout and alignment. Use recommended spindle speeds and feed rates for the specific workpiece material and tool diameter to avoid premature wear or breakage. Apply suitable cutting fluid or coolant when machining steel and other hard materials to improve tool life and hole surface finish. Clear chips regularly and avoid side-loading or pecking motions that can stress the carbide body.
What to consider before purchase
- Compatibility with your machine’s chuck and maximum RPM for a 6.60 mm carbide tool
- The workpiece material and required cutting parameters (speed, feed, coolant)
- Frequency of use and whether solid carbide advantages justify the cost
- Precision requirements for hole diameter and straightness
Usage recommendations
For best results in steel and similar materials, run at moderate cutting speeds with consistent feed, use flood or mist coolant, and avoid excessive pecking cycles. Inspect the tool for wear or chipping after extended runs and replace when cutting performance degrades to maintain hole quality.