Laminator Fellowes Neptune 3
Short description
Cheapest delivery:
Unisend LV
Esto — pay in 6 equal parts
Product information
Description
The Fellowes Neptune 3 laminator provides a compact and efficient solution for protecting documents and improving their appearance. Designed for office and home use, the Fellowes Neptune 3 supports a maximum lamination width of 32 cm and processes media at a lamination speed of 600 mm/min. With a rapid preheat time of approximately 1 minute and modest dimensions (515 mm x 170 mm x 110 mm), this model fits small workspaces while delivering consistent film bonding for papers, ID cards and small posters.
Advantages
The Fellowes Neptune 3 combines quick warm-up and steady throughput to reduce waiting time and improve workflow. Its compact footprint makes storage and placement simple in crowded offices or home desks. The machine offers reliable lamination across standard pouch thicknesses and provides even heat distribution for fewer bubbles and better adhesion. The straightforward controls and predictable performance make it suitable for users who need dependable results without complex setup.
Suitable for
- Protecting and finishing documents up to 32 cm wide
- Preserving certificates, signs and ID cards
- Laminating small posters, photos and instructional materials
- Light office and home lamination tasks
Key specifications
- Model: Fellowes Neptune 3 (MPN 5721501)
- Maximum lamination width: 32 cm
- Lamination speed: 600 mm/min
- Preheat time: approximately 1 minute
- Dimensions: 515 mm x 170 mm x 110 mm
- Category: Other office equipment
How to use
Place the laminator on a stable, level surface and connect it to a suitable power outlet. Allow the unit to preheat for about one minute until it reaches operating temperature. Insert a document inside an appropriate laminating pouch, aligning edges to avoid misfeeds, and feed the sealed end into the laminator first for best results. Guide the pouch gently while the machine draws it through; avoid pulling or forcing. After lamination, let the pouch cool flat for a short time before handling to ensure full adhesion and a smooth finish.
Usage recommendations
Use pouches that match the laminator's width capacity and recommended thicknesses, keep the feed path clear of debris, and allow the unit to cool before storing. For frequent use, check manufacturer guidance on pouch compatibility and maintenance to maintain consistent performance.
- Maximum lamination width:
- 320 mm
- Maximum document thickness:
- 0.175 mm
- Lamination speed:
- 600 mm/min
- Preheating time:
- 1 min
- Built-in display:
- Yes
- Number of rollers:
- 4
Logistics data
- Harmonized System (HS) code:
- 84729080
Weight & dimensions
- Height:
- 110 mm
- Depth:
- 170 mm
- Width:
- 515 mm
Instructions
Product comparison
The Laminator Fellowes Neptune 3 is compared against several alternative devices, including the Fellowes Amaris A3, Deli E3895-EU A3, and ARGO Sky Photo 330 A3 laminators, as well as the Fellowes Pulsar+ 300 and Fellowes Helios 60 binding machines. While all these products belong to document finishing categories, they serve fundamentally different purposes: laminators protect documents with a plastic film, whereas binding machines assemble loose sheets into books using coils or thermal adhesive. The main differences lie in processing methods, operating speeds, power requirements, and binding capacities.
⚙️ The specifications and practical differences between Laminator Fellowes Neptune 3 and each alternative are outlined in the comparison table below.
| Parameter | Laminator Fellowes Neptune 3 | Cold laminator Fellowes Amaris A3 | Deli E3895-EU A3 Office Laminator | Binding Machine Fellowes Pulsar+ 300 | Thermal Binding Machine Fellowes Helios 60 | ARGO Sky Photo 330 A3 Office Laminator | Practical significance |
|---|---|---|---|---|---|---|---|
| Device type | Laminator | Cold laminator | Office laminator | Manual binding machine | Thermal binding machine | Office laminator | These products perform entirely different core functions: lamination protects documents from wear, while binding fastens them together. |
| Lamination width | 32 cm (A3) | 32 cm (A3) | Up to A3 size | Not applicable | Not applicable | Up to A3 size | All laminator models support standard document sizes up to A3 width. |
| Speed and performance | 600 mm/min, 1 min warm-up | 780 mm/min, 1 min warm-up, 1200 W | Efficient document protection | Up to 300 sheets binding, 17 sheets punching | Up to 600 sheets binding | Smooth bubble-free lamination | The Amaris A3 offers higher operating speed, while the Neptune 3 provides a fast 1-minute warm-up time. |
◎ The table below evaluates the suitability of each product for different user needs and practical use cases.
| Use case | Recommended product | Why |
|---|---|---|
| Fast routine lamination of documents and photos | Laminator Fellowes Neptune 3 | Offers a quick 1-minute warm-up and reliable A3 width support for efficient day-to-day use. |
| High-speed lamination tasks | Cold laminator Fellowes Amaris A3 | Delivers an increased lamination speed of 780 mm/min for high-volume environments. |
| Standard office report binding up to 300 sheets | Binding Machine Fellowes Pulsar+ 300 | Mechanical binding is ideal for creating professional-looking presentations and reports. |
| Thick document binding up to 600 sheets | Thermal Binding Machine Fellowes Helios 60 | Thermal binding provides a secure and polished finish for large document sets. |
The Laminator Fellowes Neptune 3 differs from the alternatives by combining an efficient A3 lamination width with a rapid 1-minute warm-up time and a solid operating speed of 600 mm/min. It is ideal for users who need a reliable, quick-to-ready device for protecting everyday documents and photos. Choose this model if you need balanced and efficient lamination, whereas the alternative machines are better suited for high-speed cold lamination, mechanical binding, or thermal document assembly.
Stock data
| Warehouse | Stock | Delivery to the store | Store Price | |
| EU3 | 5 | 07.12.2026 | 208.99 € | Add to cart |
| WH94 | 10 | 07.12.2026 | 214.49 € | Add to cart |
| WH320 | 5 | 07.12.2026 | 226.99 € | Add to cart |
- 208.99 €Stock: 5Delivery Date: 07.12.2026Warehouse: EU3Add to cart
- 214.49 €Stock: 10Delivery Date: 07.12.2026Warehouse: WH94Add to cart
- 226.99 €Stock: 5Delivery Date: 07.12.2026Warehouse: WH320Add to cart
| Warehouse | Stock | Delivery to the store | Store Price | |
| WH109 | 10 | 21.12.2026 | 223.49 € | Add to cart |
- 223.49 €Stock: 10Delivery Date: 21.12.2026Warehouse: WH109Add to cart
Customer reviews
Customer questions
How much does the Laminator Fellowes Neptune 3 cost, and is it available for purchase?
If I order this product today, when will I receive my order?
What payment options are available?
Can Laminator Fellowes Neptune 3 be purchased with a lease?
- Select the product on the website and add it to your cart;
- When placing your order, choose the payment method “Installments”;
- Fill in the required details for the lending partner;
- Receive a decision within a few minutes.






