Product specification Air cooler Dynatron A52 Processor cooling system 8 cm 2000-8600 RPM

Description
The Dynatron A52 air cooler by INTER-TECH is a compact processor cooling system equipped with an 80 mm fan capable of 2000–8600 RPM. Designed for use in space-conscious builds, this cooler delivers targeted airflow and increased air pressure to support heat dissipation for CPUs with moderate to high thermal output. The unit uses dual ball bearings for improved operational life and stable rotation, and its grey-and-black finish suits a variety of system interiors.
Advantages
The Dynatron A52 provides a high fan speed range that enables rapid air movement when CPU load increases while allowing lower speeds for quieter operation during light tasks. Its maximum air pressure rating supports effective airflow through heat sinks and restricted case layouts. The compact 80 mm fan and modest weight make the cooler suitable for small and medium form-factor systems without imposing excessive mechanical stress on the motherboard socket.
Suitable for
- Compact desktop builds and small form-factor PCs
- Systems performing office work, web browsing and multimedia playback
- Workloads with occasional heavy CPU usage such as gaming sessions or content encoding
- System upgrades where space or clearance around the CPU is limited
Key specifications
- Cooling type: air cooler for processors
- Fan diameter: 80 mm
- Fan speed: 2000–8600 RPM
- Maximum air pressure: 89.8 mmH2O
- Bearing type: dual ball bearings
- Thermal Design Power (TDP): 140 W
- Colour: grey and black
- Weight: 0.5 kg
How to use
Install the Dynatron A52 following the motherboard and case manufacturer instructions for CPU cooler mounting. Ensure the cooler is seated evenly on the processor with appropriate thermal interface material applied between the contact surface and the CPU heat spreader. Connect the fan to the motherboard fan header or a compatible power connector, and configure fan control in BIOS/UEFI or system software to match desired performance and acoustics. Verify clearance for memory modules and case panels before finalizing installation.
Usage recommendations
For steady performance, periodically check that airflow paths are free of dust and obstructions. Use motherboard fan curves or dedicated fan controllers to balance noise and cooling according to workload. When used in compact enclosures, prioritize intake and exhaust airflow to prevent localized heat buildup around the cooler.
Specifications
Weight & dimensions
- Fan thickness:
- 13 mm
- Fan dimensions (W x D x H):
- 80 x 80 x 13
- Weight:
- 0.5 kg
- Radiator height:
- 28.6 mm
- Radiator depth:
- 82 mm
- Radiator width:
- 120 mm
Power
- Thermal Design Power (TDP):
- 140 W
- Rated voltage:
- 12 V
- Power consumption (typical):
- 23.45 W
Design
- Radiator material:
- Copper
- Material:
- Plastic, Copper
- Product colour:
- Black, Grey
Performance
- Quantity per pack:
- 1 pc(s)
- Bearing type:
- Dual ball bearing
- Maximum air pressure:
- 89.8 mmH2O
- Minimum air pressure:
- 3.69 mmH2O
- Maximum airflow:
- 26.25 cfm
- Minimum airflow (imperial):
- 5.59 cfm
- Noise level (high speed):
- 62.2 dB
- Noise level (low speed):
- 23.3 dB
- Rotational speed (max):
- 8600 RPM
- Rotational speed (min):
- 2000 RPM
- Fan diameter:
- 80 mm
- Type:
- Air cooler
- Suitable location:
- Processor