Product specification SFP Transceiver LevelOne 1.25Gbps 10km 1310nm

Description
The LevelOne SFP Transceiver 1.25Gbps 10km 1310nm is a single-mode, hot‑swappable SFP (Small Form‑factor Pluggable) module designed to add Gigabit LX fiber connectivity to compatible switches and modules. It supports a maximum data rate of 1250 Mbit/s over distances up to 10 km using a 1310 nm wavelength and a duplex LC connector. The compact transceiver is compliant with IEEE 802.3z and is powered by a single 3.3 V supply.
Advantages
This SFP transceiver provides reliable LX optical connectivity with TTL signal detection and differential LVPECL input/output for stable signal handling. It is easy to install and hot‑swappable, allowing rapid deployment or replacement without powering down equipment. The module meets Class 1 laser safety requirements and occupies a standard SFP slot for broad compatibility.
Suitable for
- Adding 1000Base‑LX fiber ports to switches with SFP/mini‑GBIC slots
- Connecting switches or network devices up to 10 km apart
- Switch‑to‑switch uplinks and distributed multi‑processing links
- High‑speed I/O file transfers and storage area network links
Key specifications
- Interface type: SFP
- Maximum data transfer rate: 1250 Mbit/s (1.25 Gbps)
- Wavelength: 1310 nm
- Maximum link distance: up to 10 km (single‑mode)
- Connector: duplex LC
- Power supply: single 3.3 V
- Compliance: IEEE 802.3z, Class 1 Laser
- Dimensions: 13.5 mm x 55.5 mm x 8.5 mm
How to use
Insert the SFP transceiver into an available SFP/mini‑GBIC slot on a compatible switch or module until it clicks into place. Connect a single‑mode duplex LC fiber patch cable between transceivers at each end of the link. Verify the link and signal status via the host device; the TTL signal detect indicator and device management will show link presence. The module is hot‑swappable, so it can be installed or removed while the host remains powered, following the host vendor's hot‑swap procedures.
Usage recommendations
Use this 1310 nm 1.25 Gbps SFP for single‑mode fiber runs up to 10 km. Ensure compatible SFP‑capable ports and confirm vendor compatibility for optimal performance. Handle the optical connector with dust caps in place when not connected and follow standard electrostatic discharge (ESD) precautions during installation.
Specifications
Logistics data
- Country of origin:
- Taiwan
- Harmonized System (HS) code:
- 85369010
Packaging data
- Number of products included:
- 1 pc(s)
- Package weight:
- 70 g
- Package height:
- 130 mm
- Package depth:
- 50 mm
- Package width:
- 70 mm
Weight & dimensions
- Height:
- 8.5 mm
- Depth:
- 55.5 mm
- Width:
- 13.5 mm
Operational conditions
- Operating relative humidity (H-H):
- 5 - 90
- Operating temperature (T-T):
- 0 - 70
Certificates
- Certification:
- Class 1 Laser: EN60825-1 FDA 21: 1040.10, 1040.11
Power
- Maximum current:
- 0.3 A
- Maximum voltage:
- 6 V
- Input voltage:
- 3.5
Features
- Compatible products:
- GSW-2453 GVT-4000
- Hot-Plug support:
- Yes
Performance
- Networking standards:
- IEEE 802.3z
- Link budget:
- 10.5 dB
- Tx power (max):
- -3 dBmW
- Tx power (min):
- -9.5 dBmW
- Wavelength:
- 1310 nm
- Maximum transfer distance:
- 10000 m
- SFP transceiver standard:
- LX
- Fiber cable diameters supported (core/cladding):
- 9/125
- Fiber optic connector:
- LC
- Single-mode fiber (SMF) supported:
- Yes
- Interface type:
- SFP
- Maximum data transfer rate:
- 1250 Mbit/s
- SFP transceiver type:
- Fiber optic