Product specification LevelOne SFP-2506 Fiber optic transceiver 2500 Mbit/s 1550 nm

Description
The LevelOne SFP-2506 is a single-mode SFP fiber optic transceiver module designed for Gigabit Ethernet links with a bidirectional data rate up to 2.5 Gbps over a single duplex fiber. It operates at a wavelength of 1550 nm using a DFB laser diode transmitter and a PIN-TIA photo-detector, features an LC duplex connector, and supports link distances up to 80 km on 9/125 µm single-mode fiber.
Advantages
The SFP-2506 offers a compact SFP form factor with hot-swappable operation, low typical power consumption (about 1 W), and compliance with SFP MSA standards. It supports Digital Diagnostics Monitoring (DDM) for real-time status monitoring and is designed to operate reliably in commercial temperature environments (0 °C to 70 °C).
Suitable for
- Long-distance single-mode fiber links up to 80 km
- Gigabit Ethernet and 2.5G network upgrades
- Network equipment with SFP slots (switches, routers, media converters)
Key specifications
- Data rate: up to 2.5 Gbps
- Wavelength: 1550 nm
- Fiber type: single-mode 9/125 µm
- Maximum reach: up to 80 km
- Transmitter: DFB laser diode
- Receiver: PIN-TIA photo-detector
- Connector: duplex LC
- Form factor: SFP (hot-swappable)
- Typical power consumption: 1 W
- Operating temperature: 0 °C to 70 °C
- Standards: SFP MSA compliant, supports DDM
How to use
Insert the SFP-2506 module into a compatible SFP slot on your switch, router, or media converter while the host device is powered on or off (hot-swap supported). Connect a duplex LC single-mode fiber cable (9/125 µm) and ensure the correct transmit/receive orientation. Configure the network device for the desired 2.5G or Gigabit Ethernet link settings and verify link status using device management or DDM diagnostics.
Usage recommendations
Use certified single-mode LC patch cables (9/125 µm) and verify transceiver compatibility with the host device. Keep operating conditions within the specified temperature range and monitor module status via DDM for signal levels and fault detection.
Specifications
Packaging content
- Quantity per pack:
- 1 pc(s)
Weight & dimensions
- Weight:
- 0.0155 kg
- Height:
- 13 mm
- Depth:
- 13.4 mm
- Width:
- 55.9 mm
Operational conditions
- Storage relative humidity (H-H):
- 5 - 85
- Operating relative humidity (H-H):
- 5 - 85
- Storage temperature (T-T):
- -40 - 85
- Operating temperature (T-T):
- 0 - 70
Certificates
- Compliance certificates:
- UL, TÜV mark, RoHS, Federal Communications Commission (FCC), CE, CB
Power
- Power consumption (typical):
- 1 W
Features
- Hot-swap:
- Yes
- Plug and Play:
- Yes
- Form factor:
- SFP
- Product colour:
- Silver
Performance
- Digital Diagnostics Monitoring (DDM):
- Yes
- Copper ethernet cabling technology:
- 2.5GBASE
- Tx power (max):
- 0 dBmW
- Tx power (min):
- -5 dBmW
- Wavelength:
- 1550 nm
- Maximum transfer distance:
- 80000 m
- Fiber cable diameters supported (core/cladding):
- 9/125
- Fiber optic connector:
- LC
- Single-mode fiber (SMF) supported:
- Yes
- Interface type:
- SFP
- Maximum data transfer rate:
- 2500 Mbit/s
- SFP transceiver type:
- Fiber optic