Product specification LevelOne SFP-2602 network transceiver module Fiber optic 2500 Mbit/s 1310 nm

Description
The LevelOne SFP-2602 is a single-mode SFP transceiver module designed for Gigabit Ethernet and 2.5G links. It supports bidirectional data transfer up to 2.5 Gbps over a single duplex fiber core, operates at a wavelength of 1310 nm using an FP laser diode, and fits LC connectors. The module is hot-swappable and rated for industrial temperature ranges, making it suitable for a variety of networking environments.
Advantages
The SFP-2602 delivers up to 2.5Gbps data rates over single-mode fiber with a reach of up to 2 km on 9/125 µm fiber. It conforms to SFP MSA standards, supports Digital Diagnostics Monitoring (DDM) for status reporting, and features low typical power consumption (around 1 W). The device is certified to common safety and compliance standards (CB, CE, FCC, RoHS, TÜV, UL) and is available in a compact, silver SFP form factor.
Suitable for
- Upgrading switches and routers to 2.5G fiber links
- Interconnecting network equipment across campus or building links up to 2 km
- Industrial and harsh-environment installations requiring wide temperature range
Key specifications
- Interface type: SFP
- Maximum data transfer rate: 2500 Mbit/s (2.5 Gbps)
- Wavelength: 1310 nm (FP laser diode)
- Connector: Duplex LC
- Link distance: up to 2 km on 9/125 µm single-mode fiber
- Digital Diagnostics Monitoring (DDM): supported
- Operating temperature: -40 °C to 85 °C
- Typical power consumption: 1 W
- Compliance: SFP MSA, CB, CE, FCC, RoHS, TÜV, UL
- Weight: 0.0155 kg
How to use
Insert the SFP-2602 module into a compatible SFP port on a switch, router or media converter while the host device is powered on; the module is hot-swappable. Connect a duplex LC single-mode fiber cable (9/125 µm) to the LC port, observing correct transmit/receive orientation. Verify link status through the host device or via DDM if supported, and ensure the connected equipment is configured for 2.5G operation as needed.
Usage recommendations
Use single-mode 9/125 µm fiber with quality LC connectors and maintain proper cable polarity. For reliable long-term operation in outdoor or industrial sites, ensure devices and cables meet environmental and installation standards; avoid excessive bending of fiber and protect connectors from dust and moisture.
Specifications
Packaging content
- Quantity per pack:
- 1 pc(s)
Weight & dimensions
- Weight:
- 0.0155 kg
- Height:
- 13 mm
- Depth:
- 13.4 mm
- Width:
- 55.9 mm
Operational conditions
- Storage relative humidity (H-H):
- 5 - 85
- Operating relative humidity (H-H):
- 5 - 85
- Storage temperature (T-T):
- -40 - 85
- Operating temperature (T-T):
- -40 - 85
Certificates
- Compliance certificates:
- UL, TÜV mark, RoHS, Federal Communications Commission (FCC), CE, CB
Power
- Power consumption (typical):
- 1 W
Features
- Hot-swap:
- Yes
- Plug and Play:
- Yes
- Form factor:
- SFP
- Product colour:
- Silver
Performance
- Digital Diagnostics Monitoring (DDM):
- Yes
- Copper ethernet cabling technology:
- 2.5GBASE
- Tx power (max):
- -3 dBmW
- Tx power (min):
- -9 dBmW
- Wavelength:
- 1310 nm
- Maximum transfer distance:
- 2000 m
- Fiber cable diameters supported (core/cladding):
- 9/125
- Fiber optic connector:
- LC
- Single-mode fiber (SMF) supported:
- Yes
- Interface type:
- SFP
- Maximum data transfer rate:
- 2500 Mbit/s
- SFP transceiver type:
- Fiber optic