Product specification Uninterruptible Power Supply PowerWalker VI 2200 SHL

Description
The PowerWalker VI 2200 SHL is a line-interactive uninterruptible power supply (UPS) that delivers 2.2 kVA (1200 W) output power in a compact tower design. It includes four AC outlets, one USB 2.0 port with HID support for easy communication, and a 9 Ah internal battery. The unit features active cooling, an internal voltage stabilizer and RJ-11 surge protection. Its charger is strengthened to recharge the battery to approximately 90% within 2–4 hours, and the UPS can be started automatically even when AC mains are not present.
Advantages
The UPS provides automatic startup without AC power, voltage stabilization for clean and stable output, and RJ-11 surge protection for connected lines. A stronger charger shortens battery recharge time to about 2–4 hours to reach 90% capacity. HID support over USB enables straightforward setup and monitoring across operating systems. The compact tower housing with active cooling supports reliable continuous operation in home or small office environments.
Suitable for
- Home desktop PCs and workstations
- Small office equipment such as routers, modems and NAS devices
- Point-of-sale terminals and cash registers
- Network devices that require short ride-through and surge protection
Key specifications
- Output power: 1200 W
- Output capacity: 2.2 kVA
- Battery: 9 Ah internal battery
- AC outlets: 4
- USB: 1 × USB 2.0 with HID support
- Form factor: Tower with active cooling
- Dimensions (W×D×H): 139 × 365 × 195 mm
- Weight: 10.2 kg
- Surge protection: RJ-11 line protection
How to use
Connect the UPS to the mains and plug your equipment into the UPS AC outlets. Use the USB port to connect to a computer for monitoring and configuration; HID support allows immediate recognition by most operating systems without additional drivers. In the event of mains failure the unit switches to battery power automatically. For the first use, allow the unit to charge until the battery reaches sufficient capacity; the enhanced charger typically restores about 90% charge within 2–4 hours depending on load and battery condition.
Usage recommendations
Install the UPS in a ventilated area free of direct heat sources and dust. Periodically test the battery by simulating a power interruption and replace the battery according to manufacturer guidelines or when runtime becomes insufficient for your devices.
Specifications
Other features
- Nominal output voltage:
- 230
- Output connections:
- 2 x Schuko, 2 x IEC C13
Logistics data
- Harmonized System (HS) code:
- 85078000
- Products per pallet:
- 42 pc(s)
Packaging data
- Package weight:
- 10400 g
- Package height:
- 292 mm
- Package depth:
- 452 mm
- Package width:
- 230 mm
- Bundled software:
- WinPower
Weight & dimensions
- Weight:
- 10.2 kg
- Height:
- 195 mm
- Depth:
- 365 mm
- Width:
- 139 mm
Design
- LED indicators:
- Y
- Display type:
- LCD
- Cooling type:
- Active
- Product colour:
- Black
- Form factor:
- Tower
Battery
- Charging current:
- 1.2 A
- Battery recharge time:
- 4 h
- Typical backup time at half load:
- 5 min
- Typical backup time at full load:
- 0.5 min
- Number of batteries supported:
- 2
- Battery voltage:
- 12 V
- Battery capacity:
- 9 Ah
Ports & interfaces
- Ethernet LAN (RJ-45) ports:
- 2
- Modem (RJ-11) ports:
- 2
- Serial ports quantity:
- 0
- USB 2.0 ports quantity:
- 1
- Number of type F outputs:
- 2
- AC outlets quantity:
- 4 AC outlet(s)
- Power plug:
- C14 coupler
Features
- Surge protection features:
- Fax, Modem, Network, Telephone
- Surge protection:
- Yes
- Efficiency:
- 95 %
- Automatic Voltage Regulation (AVR):
- Yes
- Output voltage regulation:
- 10
- Output frequency regulation:
- 1
- Input frequency:
- 50/60
- Input operation voltage (max):
- 280 V
- Input operation voltage (min):
- 170 V
- Output power:
- 1200 W
- Output power capacity:
- 2.2 kVA
- UPS topology:
- Line-Interactive