Product specification Ethernet Cable StarTech.com N6PATCH75GR RJ-45 Cat6 22.9m Grey

Description
The StarTech.com N6PATCH75GR is a 75-foot (22.9 m) Cat6 Ethernet cable with snagless RJ45 connectors and a durable grey PVC jacket. It is designed to meet or exceed Category 6 specifications for reliable Gigabit and multi-Gigabit Ethernet connections and supports Power-over-Ethernet applications. The cable uses 100% copper conductors (24 AWG) and 50-micron gold-plated RJ45 contacts to maintain signal integrity and resist corrosion.
Advantages
This Cat6 patch cable combines snagless RJ45 clips and molded boots for connector strain relief, reducing the risk of bent terminations and intermittent connections during installation and use. Constructed with 24 AWG copper conductors and 50-micron gold-plated contacts, the cable delivers high conductivity and consistent performance for demanding Ethernet tasks. The grey PVC jacket provides durability and allows color coding of cable runs. The product is ETL verified, Fluke patch cord tested to ANSI/TIA-568-2.D Category 6 standards, and backed by StarTech.com’s lifetime warranty.
Suitable for
- Gigabit Ethernet and multi-Gigabit networks (1/2.5/5 Gbps)
- Power-over-Ethernet (PoE) devices such as IP cameras and VoIP phones
- Office and data center patch panels, switches and routers
- Home networking and media streaming setups
Key specifications
- Length: 22.9 m (75 ft)
- Cable category: Cat6 (U/UTP)
- Conductors: 100% copper, 24 AWG
- Connectors: RJ-45 to RJ-45 with 50-micron gold plating
- Jacket color: Grey (PVC)
- Standards: Fluke tested to ANSI/TIA-568-2.D Category 6; ETL Verified
- Applications: 10/100/1000Base-T(X); multi-Gigabit up to 5 Gbps (10 Gbps up to 160')
How to use
Route the cable between your network devices and secure it with cable management as needed. When plugging in, press the RJ45 clip fully into the port until it clicks; the snagless design helps protect the clip during installation. Ensure connectors are not bent sharply at the termination point—the molded boots provide strain relief to reduce stress on the contacts. For optimal performance, avoid running the cable parallel to high-voltage power lines and maintain proper bend radius.
Usage recommendations
Use this Cat6 cable for standard Gigabit and PoE installations; verify device and switch port capabilities for multi-Gigabit speeds. Replace the cable if the jacket or connectors show visible damage to avoid degraded network performance.
Specifications
Logistics data
- Products per master (outer) case:
- 18 pc(s)
- Master (outer) case height:
- 255 mm
- Master (outer) case length:
- 400 mm
- Master (outer) case width:
- 360 mm
- Harmonized System (HS) code:
- 84733080
Packaging data
- Package weight:
- 770 g
- Package height:
- 324 mm
- Package depth:
- 250 mm
- Package width:
- 35.2 mm
Weight & dimensions
- Weight:
- 0.77 kg
Certificates
- Compliance certificates:
- RoHS, CE
Features
- Plug and Play:
- Yes
- Snagless cable boot:
- Yes
- Power over Ethernet (PoE):
- Yes
- Frequency:
- 650 MHz
- Data transfer rate:
- 1000 Mbit/s
- AWG wire size:
- 24
- Ethernet interface type:
- Gigabit Ethernet
- Cabling technology:
- 10/100/1000Base-T(X)
- Cable rating:
- CMG (CM)
- Conductor material:
- Copper
- Conductor type:
- Stranded
- Jacket material:
- Polyvinyl chloride (PVC)
- Connector contacts plating:
- Gold
- Connector 1 gender:
- Male
- Connector 2 gender:
- Male
- Connector 2:
- RJ-45
- Connector 1:
- RJ-45
- Product colour:
- Grey
- Cable shielding:
- U/UTP (UTP)
- Cable standard:
- Cat6
- Cable length:
- 22.9 m