Product specification Fiber Optic Cable StarTech.com 3m LC to LC OS2 9/125µm 100G

Description
StarTech.com 3m LC to LC OS2 9/125µm Single Mode Duplex Fiber Optic Cable supports high-speed 100G networks and is engineered for CWDM applications over OS2 fiber. The 3 m patch cable uses a 9/125µm bend-insensitive core optimized for 1260–1625 nm wavelengths and is compatible with laser-optimized sources. It is backward compatible with OS1 networks and intended for connections between servers, switches and other data center equipment.
Advantages
Precision ceramic ferrules and UPC-polished LC connectors provide low insertion loss (below 0.3 dB) and improved return loss versus older PC polishing methods. The bend-insensitive fiber construction and a low-refractive-index cladding layer reduce light leakage and maintain signal integrity over long distances. The cable meets or exceeds ITU-T G.652.D / G.657.A1 and IEC60703-2-50 type B1.3 / B6.a1 standards, and each cable is individually tested with an included insertion loss test report. The jacket is Low-Smoke Zero-Halogen (LSZH) for reduced smoke and toxic emissions in confined or poorly ventilated spaces.
Suitable for
- Data center uplinks and cross-connects
- High-speed 100G network links
- CWDM wavelength-multiplexed systems (1260–1625 nm)
- Connections between servers, switches and telecommunications equipment
Key specifications
- Fiber type: OS2 single mode, 9/125 µm
- Connectors: LC (UPC) to LC (UPC), duplex
- Length: 3 m
- Wavelength support: 1260–1625 nm (CWDM)
- Insertion loss: <0.3 dB (typical)
- Standards: ITU-T G.652.D / G.657.A1; IEC60703-2-50 type B1.3 / B6.a1
- Jacket: LSZH (yellow)
How to use
Inspect connector end faces and cable for damage before installation. Clean LC (UPC) connectors with appropriate fiber cleaning tools, then insert each LC connector into the corresponding LC adapter or transceiver port until it clicks. Route the cable to avoid tight bends and maintain bend radius limits; secure with cable management hardware to prevent strain on the connectors. Verify link status and measure insertion loss against the included test report to confirm proper installation.
Usage recommendations
For reliable long-term performance, avoid exceeding the manufacturer’s minimum bend radius, keep connector end faces clean, and store unused connectors with protective dust caps. Use LSZH-rated cable where building codes or confined environments require low smoke and low halogen emissions.
Specifications
- Full duplex:
- Yes
- Data transfer rate:
- 10 Gbit/s
- Insertion loss:
- 0.3 dB
- Fiber mode structure:
- Single-mode
- Core diameter:
- 9 µm
- Cladding diameter:
- 125 µm
- Bending radius:
- 10 mm
- Wavelengths supported:
- 1490, 1383, 1310, 1300, 1280, 1260, 1550, 1590, 1600, 1625
- Attenuation (max):
- 0.35 dB/km
- Fibre optic type:
- OS2
- Return loss:
- 55 dB
- Connector polish type:
- UPC
Technical details
- Sustainability compliance:
- Yes
Logistics data
- Products per master (outer) case:
- 280 pc(s)
- Master (outer) case height:
- 280 mm
- Master (outer) case length:
- 380 mm
- Master (outer) case width:
- 380 mm
Other features
- Cable diameter:
- 2 mm
Packaging data
- Package weight:
- 27.5 g
- Package height:
- 4 mm
- Package depth:
- 220 mm
- Package width:
- 200 mm
Packaging content
- Quantity per pack:
- 1 pc(s)
Certificates
- Compliance certificates:
- CE
Operational conditions
- Storage temperature (T-T):
- -20 - 60
- Operating temperature (T-T):
- -20 - 60
Features
- Cable type:
- LC/UPC
- Jacket material:
- Polypropylene, Low smoke zero halogen (LSZH)
- Connector 1 gender:
- Male
- Connector 2 gender:
- Male
- Connector 2:
- LC
- Connector 1:
- LC
- Product colour:
- Yellow
- Cable length:
- 3 m