Product specification Unmanaged Switch Trendnet TI-PG102

Description
The TRENDnet TI-PG102 is an unmanaged 10-port Industrial Gigabit PoE+ DIN-rail switch designed for industrial networking. It provides eight Gigabit PoE+ ports with a total 240 W PoE power budget and two additional gigabit RJ-45/SFP shared uplink ports. Housed in an IP30-rated metal enclosure, the switch is built to withstand vibration and shock and to operate across a wide temperature range of -40° to 75°C (-40° to 167°F). The TI-PG102 supports Gigabit Ethernet speeds, a 20 Gbit/s switching capacity and a 16,000-entry MAC address table, and accepts a DC input voltage of 48–56 V.
Advantages
The switch delivers PoE+ power to up to eight devices from a single 240 W budget, simplifying installations of IP cameras, access points, and other PoE devices. Its unmanaged design requires no configuration while providing reliable Gigabit throughput and industry-standard interoperability. The rugged IP30 metal housing, wide operating temperature range, and dual redundant power inputs with an output alarm relay increase fault tolerance and suitability for harsh environments.
Suitable for
- Industrial and factory network segments requiring PoE-powered devices
- IP camera deployments and video surveillance systems
- Wireless access point backhaul in industrial or outdoor-adjacent sites
- Network extension where two gigabit uplinks (RJ-45/SFP) are needed
Key specifications
- Ports: 8 × Gigabit PoE+ ports + 2 × Gigabit RJ-45/SFP shared ports (total 10 ports)
- PoE budget: 240 W (supports IEEE 802.3af/at)
- Switching capacity: 20 Gbit/s
- MAC address table: 16,000 entries
- Power input: DC 48–56 V; dual redundant power inputs with output alarm relay
- Operating temperature: -40° to 75°C (-40° to 167°F)
- Enclosure: IP30-rated metal housing
- Weight: 0.445 kg
- Standards: IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.3af, 802.3at
- Mounting: DIN-rail / wall-mountable
How to use
Mount the TI-PG102 on a DIN rail or wall surface in a well-ventilated location and connect the DC power sources to the redundant power inputs according to the installation guide. Connect PoE devices (cameras, wireless APs, VoIP phones) to the eight PoE+ ports and use the two shared RJ-45/SFP ports for uplink or fibre connections as required. The unmanaged switch is plug-and-play with no additional configuration needed; confirm device PoE class and total power draw to ensure the 240 W budget is not exceeded.
Usage recommendations
For reliable operation in industrial environments, use appropriately rated DC power supplies within the 48–56 V range, verify cable quality for Gigabit and PoE transmission, and balance PoE device placement to avoid exceeding the 240 W total power budget. Regularly inspect mounting and cabling for signs of wear in high-vibration settings.
Specifications
Logistics data
- Harmonized System (HS) code:
- 85176990
Certificates
- Certification:
- CE FCC
Packaging data
- Terminal block included:
- Yes
- Wall mounting kit:
- Yes
Weight & dimensions
- Weight:
- 0.445 kg
- Height:
- 48 mm
- Depth:
- 120 mm
- Width:
- 155 mm
Operational conditions
- Operating relative humidity (H-H):
- 0 - 95
- Operating temperature (T-T):
- -40 - 75
Power over Ethernet (PoE)
- Total Power over Ethernet (PoE) budget:
- 240 W
- Power over Ethernet (PoE) power per port:
- 30 W
- Power over Ethernet plus (PoE+) ports quantity:
- 8
- Power over Ethernet (PoE):
- Yes
Power
- Power consumption (max):
- 5.67 W
- Input voltage:
- 48/56
- DC input voltage:
- 48 - 56
- Redundant power supply (RPS) support:
- Yes
Performance
- Mean time between failures (MTBF):
- 510400 h
- Buffer size:
- 2048 KB
Design
- Wall mountable:
- Yes
- International Protection (IP) code:
- IP30
- DIN rail mounting:
- Yes
- LED indicators:
- Y
- Housing material:
- Metal
- Product colour:
- Black
- Rack mounting:
- No
Data transmission
- Store-and-forward:
- Yes
- Forwarding rate:
- 14.8 Mpps
- Switching capacity:
- 20 Gbit/s
- MAC address table:
- 16000 entries
Network
- Auto-negotiation:
- Yes
- MAC address auto-learning supported:
- Yes
- MAC address auto-aging supported:
- Yes
- Full duplex:
- Yes
- Networking standards:
- IEEE 802.3af, IEEE 802.3z, IEEE 802.3x, IEEE 802.3u, IEEE 802.3at, IEEE 802.3ab, IEEE 802.3
Ports & interfaces
- Power connector:
- DC-in jack
- SFP module slots quantity:
- 2
- Basic switching RJ-45 Ethernet ports type:
- Gigabit Ethernet (10/100/1000)
- Basic switching RJ-45 Ethernet ports quantity:
- 10
Management features
- Switch type:
- Unmanaged