WAVIN BEND S&W50X88PVC GREY — PVC pipe bend 50×88 mm, grey

WAVIN BEND S&W50X88PVC GREY is a grey PVC pipe bend with dimensions 50×88 mm designed for plumbing and drainage systems. This fitting changes the direction of a pipeline and provides a connection where a 50 mm pipe requires an 88 mm offset. Manufactured from PVC, the component is intended for use in waste, soil and ventilation piping in residential and light-commercial installations, offering chemical resistance and dimensional stability typical of PVC drainage fittings.

Advantages

The WAVIN PVC bend provides a reliable directional change between different offsets while maintaining a compact footprint. Its grey PVC construction resists corrosion and common household sewage chemicals, and the smooth internal surface supports unobstructed flow. The fitting is compatible with standard PVC drainage systems and can be integrated with solvent-weld or push-fit installation methods depending on system requirements.

Suitable for

• Domestic wastewater and soil stacks
• Kitchen, bathroom and sanitary appliance connections
• Ventilation runs within drainage systems
• Light-commercial drainage installations

Key specifications

• Material: PVC (polyvinyl chloride)
• Colour: Grey
• Connection configuration: 50 mm inlet to 88 mm offset
• Function: Directional bend for drainage and soil/vent pipes
• Application environment: Indoor plumbing and drainage systems

How to use

Prepare mating pipe ends by cleaning and, if required by the chosen method, apply primer and solvent cement to both the fitting and pipe surfaces. Insert the pipe into the bend and allow the joint to cure according to the adhesive manufacturer's instructions if using solvent-weld. If the system uses push-fit or gasketed connections, ensure seals are clean and properly seated before assembly. Position the bend to achieve the required offset and secure surrounding pipework with suitable hangers or supports to prevent strain on the joint.

Usage recommendations

Verify compatibility with the existing drainage system and local plumbing regulations before installation. Avoid exposure to open flame or temperatures beyond PVC manufacturer recommendations. For long-term performance, provide adequate slope for gravity drainage and allow joints to cure fully before testing the system under load.