Internal Solid State Drive 2-Power 2P-INSSD256GS625P5 256GB 70x100x7mm

The 2-Power 2P-INSSD256GS625P5 is a 256GB internal solid state drive designed to provide faster data access and improved system responsiveness compared to traditional mechanical drives. With compact dimensions of 70 x 100 x 7 mm, this 2-Power SSD fits into a variety of laptop and desktop drive bays that accept a 7 mm thickness, offering a straightforward storage upgrade for systems that support standard SATA interfaces.

Advantages

This internal solid state drive delivers reduced boot and application load times, lower power consumption during operation, and increased shock resistance due to its lack of moving parts. The 256GB capacity balances storage space and cost for typical user profiles, while the slim form factor allows installation in space-constrained devices. Reliability and silent operation are additional practical benefits for everyday use.

Suitable for

• Upgrading laptop storage to improve boot and application performance
• Replacing aging desktop hard drives to reduce noise and increase reliability
• Secondary internal storage for media, documents, and project files
• Compact systems and small form-factor PCs that require a 7 mm drive

Key specifications

• Form factor: 2.5-inch internal solid state drive
• Storage capacity: 256 GB
• External dimensions: 70 x 100 x 7 mm (width x depth x height)
• Interface: SATA-compatible connection (standard internal SATA interface expected)
• Construction: solid-state (no moving parts) for improved shock resistance

How to use

Power down the computer and disconnect it from mains power. Open the device’s case or access panel, locate the 2.5-inch drive bay or mounting bracket compatible with a 7 mm drive, and secure the SSD using the appropriate screws or caddy. Connect the drive to the motherboard using the internal SATA data cable and attach the SATA power connector from the power supply. After reassembling the case, power on the system and enter the operating system installer or disk management utility to initialize, partition, and format the new drive as required. If replacing an existing drive, use cloning software or a system backup to transfer data before removing the original drive.

Usage recommendations

For best results, ensure the host system supports SATA drives and that firmware or BIOS settings are configured for AHCI mode where available. Regularly back up important data and keep the system’s firmware and drivers up to date. Allow adequate airflow around the drive in compact enclosures to maintain optimal operating temperature.