Acrylic Sheet 3M HH 4910 11 m Red Transparent 19 mm thickness 1 mm edge

Acrylic Sheet 3M HH 4910 is a red transparent protective film supplied in an 11 m roll with a 19 mm substrate width and a 1 mm film thickness. The material combines color transmission and surface protection, allowing light to pass while reducing abrasion and scratch visibility on decorative and functional surfaces. It is intended for use in signage, displays, architectural accents and protective overlays where a thin, colored acrylic layer is required.

Advantages

The acrylic film provides uniform red tint and consistent light transmission along the length of the roll. Its 1 mm thickness offers a balance between flexibility and durability for application onto flat or gently curved surfaces. The film reduces the risk of surface scratches and wear while preserving underlying materials. Supplied in an 11 m length with a 19 mm usable substrate width, the roll supports small- to medium-scale projects and repeat applications without frequent replacement.

Suitable for

• Signage and lightbox color overlays
• Retail and exhibition display accents
• Architectural trim and decorative strips
• Protective overlays for painted or printed surfaces
• Craft and DIY projects requiring colored transparent film

Key specifications

• Color: red transparent
• Length: 11 m
• Substrate width: 19 mm
• Film thickness: 1 mm
• Material type: acrylic (PMMA) film
• Light transmission: transmissive with colored tint

How to use

Clean and dry the target surface to remove dust, grease and loose particles before applying the acrylic film. Measure and cut the required length from the roll, allowing small overlap if needed for edge sealing. Align the film carefully and apply from one end, smoothing out air pockets with a soft squeegee or lint-free cloth. For curved surfaces, apply slowly and maintain even tension to avoid wrinkles. Trim excess material and secure edges as required for the installation environment.

Usage recommendations

Use in indoor or protected outdoor locations; avoid prolonged exposure to harsh weather or strong solvents. Store rolls flat or on a spool in a cool, dry place away from direct sunlight to maintain film properties. Test a small area before full application to confirm adhesion and visual effect on the chosen substrate.