Full motion TV wall mount ACT AC8357 for 43"–90" screens, VESA 100x200–600x400, tilt -15°–3°, swivel ±30°, max load 50 kg, ultra slim

The ACT AC8357 full motion TV wall mount supports flat-panel TVs from 43" to 90" with a maximum load of 50 kg. Its ultra-slim design lets you position the screen close to the wall at 1.95 cm or extend the arm to place the TV up to 25 cm from the wall. The mount offers tilt and swivel adjustments so you can set the optimal viewing angle and includes a complete installation kit with a drilling guide, bubble level and mounting material.

Advantages

The AC8357 combines a low-profile appearance with a wide range of motion, allowing both a sleek wall-mounted look and a pulled-out position for easier access. Its adjustable tilt (-15° to 3°) and swivel (±30°) range help reduce glare and suit different seating arrangements. The package contains all required installation tools and cover strips to hide screws for a tidy finish.

Suitable for

• Home living rooms and home cinemas
• Conference rooms and meeting spaces
• Public displays in lobbies or waiting areas
• Rooms where flexible viewing angles and a slim wall profile are desired

Когда он может быть непригоден

This mount is not suitable for TVs heavier than 50 kg or screens smaller than 43". It may not fit installations that require an extended reach beyond 25 cm from the wall or non-standard VESA patterns outside the supported range. Wall type and stud placement may also limit mounting options in some locations.

Key specifications

• Supported screen size: 109.2 cm (43") to 2.29 m (90")
• Maximum load capacity: 50 kg
• Adjustable wall distance: minimum 1.95 cm, maximum 25 cm
• Tilt range: +3° to -15°
• Swivel range: +30° to -30°
• Screen level alignment: ±3°
• VESA compatibility: 100x200 mm up to 600x400 mm
• Materials: steel and plastic, black finish
• Number of displays supported: 1

How to use

Install the mounting bracket to a suitable load-bearing wall using the provided drilling guide and bubble level. Attach the VESA plates to the back of your TV following the supported VESA pattern, then hang the TV on the wall bracket and secure it. Adjust the arm to the desired distance from the wall and set the tilt and swivel to achieve the preferred viewing angle. Use the included cover strips to conceal screws for a neat appearance.

What to consider before purchase

• Confirm your TV weight does not exceed 50 kg
• Verify the TV’s VESA pattern is within 100x200 mm to 600x400 mm
• Check available wall depth and stud locations for secure mounting
• Ensure the desired minimum and maximum wall gap (1.95–25 cm) suits your setup

Usage recommendations

For safe and stable installation, mount the bracket into wall studs or appropriate anchors for your wall type. When adjusting tilt or swivel, check that cables have sufficient slack and do not strain connectors. Periodically verify fasteners remain tight, especially after adjusting the arm position.