ACT Powercord C14–C15 angled right IEC60320 black 1.2 m H05RN-F 10 A 250 V

ACT Powercord C14–C15 is a black IEC60320 mains cable with a straight C14 inlet and a right-angled C15 outlet. The cable uses H05RN-F conductors and is 1.2 m long, rated for 10 A and 250 V. The C15 connector is designed for higher temperature resistance (up to 120°C) and is intended for powering IT equipment such as servers, UPS units and network switches that require a C15 connection.

Advantages

The right-angled C15 connector allows connection in confined spaces and improves cable routing behind equipment. The C15 contact is heat-resistant up to 120°C, suitable for devices with elevated inlet temperatures. H05RN-F construction provides flexibility and durability for typical rack and desktop environments.

Suitable for

• Servers and rack-mounted equipment
• Network switches and routers (e.g., HP, Cisco)
• UPS units and power distribution devices with a C15 inlet
• Situations requiring a right-angled inlet to save space

When it may not be suitable

This cable is rated for a maximum of 10 A and 250 V; it is not suitable for equipment or installations that require higher current or different voltage ratings. It also uses an IEC C14 to C15 connection — devices without a C15 inlet or requiring a different connector type will need another cable.

Key specifications

• Cable length: 1.2 m
• Connector pair: IEC60320 C14 (straight) to C15 (angled right)
• Temperature resistance (C15): up to 120°C
• Rated voltage/current: 250 V / 10 A
• Cable type: H05RN-F, conductor size 1.0 mm²
• Colour: black

How to use

Insert the straight C14 male end into the equipment or PDU inlet and the right-angled C15 female end into the device with a C15 inlet. Ensure both connectors are fully seated and that the cable is routed to avoid sharp bends or strain. Use the cable in indoor environments and within its rated electrical limits.

What to consider before purchase

• Check that the target device has a C15 inlet (not just a C13)
• Confirm the required current and voltage do not exceed 10 A / 250 V
• Ensure 1.2 m length and right-angled orientation suit your rack or equipment layout

Usage recommendations

For reliable operation, route the cable to avoid heat sources and sharp edges, secure it to prevent strain on connectors, and use it only with compatible equipment that accepts an IEC C15 inlet.