Powercord ACT C20–C21 IEC60320 red 2.5 m, 16 A 250 V

The ACT powercord with IEC60320 C20 to C21 connectors is a mains cable designed for high-power IT equipment. In a red 2.5 m length, it provides a reliable connection between devices with C20 inlets and equipment using C21 device couplers, and is rated for 16 A at 250 V. The C21 connector is high-temperature resistant up to 155°C, making the cable suitable for demanding server and professional networking environments.

Advantages

This powercord supports a 16 A/250 V load and features a C21 connector that withstands temperatures up to 155°C. Its 2.5 m red cable offers visible routing in rack and data-center installations, and the IEC60320 C20–C21 pairing is widely used by servers, UPS units and professional IT hardware. The cable is constructed with 1 mm² conductors to meet common power delivery requirements for compatible equipment.

Suitable for

• Servers from common brands (e.g., HP)
• Network switches and professional networking equipment (e.g., Cisco)
• UPS units and rack-mounted power distribution devices
• High-current IEC60320 C20 inlet applications in data centres and server rooms

Когда он может не подойти

This cable is not suitable for devices that require other connector types (for example C13/C14, C19/C20 or regional mains plugs). It is also unsuitable where voltage or current requirements exceed 250 V or 16 A, or where a different conductor cross-section is specified by the equipment manufacturer.

Key specifications

• Cable length: 2.5 m
• Connectors: IEC60320 C20 (male) to C21 (female)
• Rated voltage and current: 250 V~, 16 A
• C21 connector temperature resistance: up to 155°C
• Conductor cross-section: 1.0 mm²
• Colour: red

How to use

Connect the C20 male end to the power supply or power distribution unit with a matching C20 inlet and plug the C21 female coupler into the device requiring power. Ensure both ends are fully seated and that the cable routing avoids sharp bends or pinching. Confirm the device’s power requirements match the cable’s 16 A / 250 V rating before use.

What to consider before purchase

• Confirm the device uses an IEC60320 C21 inlet (and that the power source or PDU provides a C20 outlet).
• Verify the equipment’s voltage and current requirements do not exceed 250 V and 16 A.
• Decide if a 2.5 m cable length and red colour suit your installation and cable management needs.

Usage recommendations

For safe operation, use this cable in indoor, protected environments such as server rooms and data centres; avoid exposure to liquids and extreme mechanical stress. Replace the cable if insulation is damaged or if connectors show signs of overheating.