Power cord ACT C20–C21 IEC60320 red 3 m, 16 A, 250 V

The ACT power cord with IEC60320 C20 to C21 connectors is a 3 m red mains lead designed to connect C20 inlets to equipment with C21 connectors. Rated for 16 A and 250 V, the cable is intended for high-power IT equipment such as servers, UPS units and rack-mounted devices where a C20–C21 connection is required. The C21 connector is high-temperature resistant up to 155°C.

Advantages

The cable provides a standardized IEC60320 C20–C21 connection for reliable power delivery in data centres and IT cabinets. With a 3 m length and 1 mm² conductor cross-section it offers sufficient reach and current capacity for many rack and server installations. The red colour helps with visual identification and cable management.

Suitable for

• Servers and blade chassis
• Rack-mounted UPS and PDUs
• Network switches and high-power network equipment
• Data centre and server room power distribution

When it may not be suitable

This cable is not suitable for devices that require connector types other than IEC60320 C20 or C21, such as equipment using C13/C14 or country-specific mains plugs. It is also not appropriate where higher current or different conductor cross-sections are required beyond the rated 16 A and 1 mm².

Key specifications

• Cable length: 3 m
• Connectors: IEC60320 C20 (male) to IEC60320 C21 (female)
• Rated voltage: 250 V~
• Rated current: 16 A
• C21 high-temperature resistance: up to 155°C
• Conductor cross-section: 1 mm²
• Colour: red
• Quantity: 1 piece

How to use

Inspect both the cable and equipment inlets before use. Insert the C20 male end into the corresponding C20 outlet and connect the C21 female end to the equipment's C21 inlet until secure. Ensure the connected equipment and installed infrastructure do not exceed the cable's rated 16 A and 250 V. Route the cable to avoid sharp bends and heat sources; secure it to prevent strain on the connectors.

What to consider before purchase

• Verify the equipment inlet type is IEC60320 C21 and the power source provides a C20 outlet.
• Confirm required current and voltage do not exceed 16 A and 250 V.
• Consider cable length and colour for routing and identification in racks.

Usage recommendations

Use this ACT C20–C21 IEC60320 power cord for server and rack environments where a high-temperature-resistant C21 connector and a clear red cable are beneficial for identification and safe power delivery. Regularly check connections and replace the cable if any damage or overheating signs appear.