Powercord ACT C14 to C21 IEC60320 red 1.5 m, 250 V 10 A

ACT power cord with IEC60320 C14 male to C21 female connectors in red, 1.5 m length. Rated for 250 V and 10 A, the cable is suitable for powering compatible IT equipment such as servers, PDUs and power supplies that use C14/C21 interfaces. The C21 connector is high-temperature resistant up to 155°C, and the flexible 1 mm² conductor provides reliable AC power delivery in data centers, server rooms and rack installations.

Advantages

The cable combines a standard IEC60320 C14 plug with a C21 receptacle to support equipment that requires a high-temperature resistant connection. Its 1.5 m length offers convenient reach in rack environments, while the 1 mm² conductor and 250 V / 10 A rating cover typical server and network device power requirements. The red color improves cable identification in dense installations.

Suitable for

• Connecting servers and rack-mounted equipment that use C14/C21 power interfaces
• Power distribution units (PDUs) in data centers and server rooms
• Network switches and enterprise IT equipment from common vendors
• Short to medium cable runs inside racks and enclosures

When it may not be suitable

This cable is not suitable for devices that require different connector types (for example C13, C19 or country-specific mains plugs) or for applications needing higher current or voltage than 10 A / 250 V. It is also unsuitable where longer cable lengths or different conductor cross-sections are required for voltage drop or mechanical routing reasons.

Key specifications

• Cable length: 1.5 m
• Connectors: IEC60320 C14 (male) to IEC60320 C21 (female)
• Temperature resistance (C21): up to 155°C
• Rated voltage and current: 250 V, 10 A
• Conductor cross-section: 1.0 mm²
• Color: red

How to use

Insert the C14 male plug into the corresponding C14 inlet on a PDU or power source, and connect the C21 female end to the matching C21 inlet of the target device. Ensure both ends are fully seated and that the connected equipment is powered off when making or removing connections. Route the cable to avoid sharp bends and mechanical strain; secure as required in rack environments.

What to consider before purchase

• Verify that the device accepts a C21 inlet and that the power source provides a C14 outlet
• Confirm that 250 V / 10 A and 1.0 mm² conductor meet the power and safety requirements of your equipment
• Consider cable length and color for routing and identification in your installation

Usage recommendations

The cable is intended for indoor use in controlled environments such as data centers and server rooms; avoid exposure to moisture or direct sunlight and inspect connectors for damage before use.