Multimode Fiber Optic Cable ACT 50m OM3 8 Fibers LC Connectors

The ACT 50m Multimode Fiber Optic Cable OM3 with 8 fibers and LC connectors is a pre-terminated, ready-to-install fiber link suitable for indoor and outdoor applications. With a 50 µm core diameter and OM3 multimode specification, the cable supports high-speed data transmission and is designed for structured cabling between rooms, floors or adjacent buildings. Each cable is factory-terminated and tested to provide consistent optical performance and to eliminate the need for on-site connector termination.

Advantages

Pre-terminated and individually tested at production, the ACT cable removes the need for specialized termination tools and field polishing. The transparent protective tube and robust construction protect connectors and fanouts during handling and installation, while the compact outer diameter and drawbar eye enable straightforward pulling through conduits and cable routes. Low attenuation values provide margin in optical budgets and support reliable, long-term operation in enterprise and data center environments.

Suitable for

• Connecting different rooms within a building
• Vertical cabling between floors
• Short campus links between nearby buildings
• Patch or trunk applications in data closets and equipment rooms

Key specifications

• Fiber type: Multimode OM3
• Core diameter: 50 µm
• Fiber count: 8 fibers
• Connector type: LC on both ends
• Length: 50 meters
• Construction: Pre-terminated with protective fanout tube
• Installation: Suitable for indoor and outdoor use; horizontal and vertical routing
• Typical attenuation: average 0.10 dB, maximum 0.15 dB (factory tested)
• Rated tensile performance: designed to withstand typical pulling forces during installation (robust outer protection and drawbar eye)
• Compliance: Meets Dca Euroclass requirements under CPR for building applications

How to use

Unpack the ACT pre-terminated cable and route it along the planned pathway. Use the integrated drawbar eye and the compact protective tube to pull the cable through conduits or cable trays. Position the LC connectors into the corresponding equipment or patch panels and secure any excess cable in a fiber management tray. Because connectors are factory-terminated and individually tested, there is no requirement for on-site polishing or connectorization; however, confirm connector cleanliness before mating using appropriate inspection tools or cleaning materials.

Usage recommendations

Follow the installation guidance provided on the cable QR code or accompanying documentation. Avoid sharp bends beyond the specified bend radius and limit pulling tension to recommended levels. Clean connectors prior to connection and store unused ends in protective caps. Use appropriate fiber management to prevent micro-bends and ensure long-term performance.