Studio headphones ADAM AUDIO H200 — closed, 40 mm drivers, 32 Ω, 2–23.5 kHz, wired 3 m detachable cable, circumaural, black

ADAM AUDIO H200 studio headphones are closed-back, circumaural monitoring headphones designed for recording, tracking and critical listening in treated studio environments. They use 40 mm neodymium drivers and a 32 Ω nominal impedance to deliver a wide frequency response from 2 Hz to 23,500 Hz. The H200 set includes a 3 m detachable wired cable with a 2.5 mm connector and a carry pouch; the headphones weigh approximately 250 g and are finished in black.

Advantages

The closed acoustic design limits sound leakage and isolation, making the H200 suitable for monitoring while recording. Large 40 mm neodymium drivers provide detailed transient response and low distortion (THD + noise < 0.02%), while a wide frequency range supports accurate reproduction of low and high-frequency content. A detachable 3 m cable with 2.5 mm connector simplifies cable replacement and transport, and the circumaural ear coupling gives comfortable coverage for extended studio sessions. Lightweight construction aids prolonged wear without excessive fatigue.

Suitable for

• Tracking and overdubbing in the recording studio
• Reference monitoring during mixing sessions
• Closed-back monitoring when bleed isolation is required
• Editing and post-production tasks that require extended listening

Key specifications

• Acoustic system: Closed-back circumaural
• Driver diameter: 40 mm neodymium
• Impedance: 32 Ω
• Frequency response: 2–23,500 Hz
• Total harmonic distortion (THD + noise): <0.02%
• Cable: Detachable wired cable, 3 m length with 2.5 mm connector
• Wearing style: Head-band, circumaural ear cups
• Weight: Approx. 250 g
• Operating temperature range: −30 °C to 50 °C
• Includes: Carry pouch and replacement earplugs compatibility

How to use

Connect the detachable 3 m cable to the headphone jack using the 2.5 mm connector and attach the other end to your headphone output or interface. Position the circumaural cups over the ears and adjust the head-band for a comfortable, secure fit. Use the closed-back design when you need isolation from room sound or when monitoring while recording. Allow short pauses during long sessions and lower listening levels when performing critical long-duration work to preserve hearing and avoid fatigue.

Usage recommendations

Avoid prolonged listening at high volume levels to prevent hearing damage. For consistent reference monitoring, use the H200 in a treated room or with a calibrated reference level. Store the headphones in the supplied carry pouch when not in use and replace the detachable cable if signs of wear appear.