AV extender Adder ALIF1002P-IEC HDMI over IP 1080p 60Hz

ADDERLink Infinity 1002 (ALIF1002P-IEC) is a high-performance AV/KVM extender that transmits HDMI video, audio, keyboard and mouse signals over IP or single CATx/fibre links. It is designed to locate critical computing hardware in a secure, temperature-controlled environment while delivering a pixel-accurate desktop experience at distances from 100 m on a single CATx cable up to multiple kilometres over fibre or unlimited extension using a standard IP network.

Advantages

The ALIF1002P-IEC provides lossless, spatially-accurate video with 1:1 pixel mapping for pixel-perfect and colour-accurate output. It supports plug-and-play operation with no drivers required, USB 2.0 class control for HID and selective disabling of non-HID devices, intelligent EDID management to pass true monitor characteristics, and redundant network operation that automatically switches ports on failure. The unit supports a range of link types (CAT5e/6/7, 1GbE networks and SFP fibre transceivers) and includes dithering support for MacPro graphics to maintain link performance.

Suitable for

• Remote desktop and control rooms where hardware must be secured or cooled separately
• Broadcast, AV and post-production environments requiring pixel-accurate HDMI at up to 1920 x 1200@60Hz (native device limit) and 1080p@60Hz
• Industrial and critical infrastructure setups where long-distance AV extension and redundancy are required

Key specifications

• Model: ADDERLink Infinity 1002 (ALIF1002P-IEC), MPN ALIF1002P-IEC, EAN 8716065347104
• Signal type: HDMI video and audio, USB 2.0 (class control)
• Maximum supported resolution: up to 1920 x 1200 @ 60Hz (device spec), commonly used at 1080p @ 60Hz
• Extension distances: 100 m over single CATx; unlimited via 1GbE network hops; 500 m to 10 km over fibre using SFP transceivers
• Connection options: single CATx, 1GbE network, SFP fibre modules
• Features: pixel-perfect spatially-lossless encoding, EDID management, plug-and-play, redundant network ports, Magic Eye dithering support for MacPro

How to use

Connect the ALIF1002P-IEC transmitter to the source computer's HDMI and USB ports and connect the receiver to the user workstation monitor and peripherals. Use a single CATx cable for short runs, insert SFP fibre transceivers for long-distance fibre links, or deploy over an existing 1GbE network to extend beyond 100 m by adding standard network devices. Power the units, allow automatic EDID exchange, and operate without additional drivers; the system will maintain pixel-accurate video and handle USB HID devices while optionally restricting non-HID mass storage access.

Usage recommendations

For reliable performance, use good-quality CAT5e/CAT6/CAT7 cabling or appropriate SFP fibre transceivers, enable redundant network ports in critical installations, and verify monitor EDID settings after installation to ensure correct resolution and colour reproduction.