SO-DIMM DDR4 8GB 3200MHz memory module AFOX for laptops, 260-pin, 1.2V, unbuffered

AFOX SO-DIMM DDR4 8GB 3200MHz laptop memory module, 260-pin, 1.2 V, unbuffered. This single-module upgrade is designed for compatible notebooks and small form-factor systems, providing an 8 GB capacity in a compact 260-pin SO-DIMM form factor. The module supports dual-channel operation when paired with a matching module and is RoHS compliant.

Advantages

The module delivers a 3200 MHz memory clock and up to approximately 17 GB/s memory bandwidth, enabling improved multitasking and responsiveness compared with lower-frequency modules. Its unbuffered DDR4 design and low operating voltage (1.2 V) make it suitable for standard laptop memory slots while keeping power consumption modest. The compact 260-pin SO-DIMM format and single-module configuration allow easy installation and straightforward capacity expansion.

Suitable for

• Upgrading laptop memory to increase RAM capacity
• Small form-factor PCs and compact workstations that accept 260-pin SO-DIMM modules
• Systems requiring DDR4 3200 MHz unbuffered SO-DIMM modules

Key specifications

• Capacity: 8 GB (1 x 8 GB)
• Memory type: DDR4, unbuffered
• Form factor: 260-pin SO-DIMM
• Clock speed: 3200 MHz
• Memory channels: Dual-channel capable
• Typical maximum bandwidth: ~17 GB/s
• Voltage: 1.2 V
• Row active time (tRAS): 33 ns
• Row cycle time (tRC): 46.5 ns
• Refresh row cycle time (tRFC): 260 ns
• ECC: No
• Operating temperature: 0 to 85 °C
• Storage temperature: -55 to 100 °C
• Physical dimensions: 69.6 mm (width) x 30 mm (height)
• Weight: 8 g

How to use

Power off the laptop and disconnect any power sources and batteries if removable. Open the memory compartment following the device manufacturer's instructions, locate an empty SO-DIMM slot or remove the existing module if replacing, align the module's notch with the slot, insert the module at the correct angle and press gently until the retaining clips engage. Reassemble the device, reconnect power, and boot to confirm the system recognizes the new memory. If dual-channel operation is desired, install a matching module in the paired slot.

Usage recommendations

Install this AFOX SO-DIMM DDR4 8GB 3200MHz module in systems that support DDR4 SO-DIMM 3200 MHz specifications. Verify motherboard or laptop compatibility (supported memory speeds, capacities, and maximum total RAM) in the device manual before purchase. Dispose of electronic waste in accordance with local regulations. RoHS compliance indicates restricted use of certain hazardous substances.