Thermal Paste AG TermoPasty SMAR with Molybdenum Disulfide for Cranes 400 ml

AG TermoPasty SMAR with Molybdenum Disulfide is a grease-type thermal paste supplied in a 400 ml cartridge designed for industrial and heavy-duty applications such as cranes. The formulation combines lubricant and heat-transfer properties to reduce friction, improve contact under load and support thermal conduction on metal sliding surfaces, bearings and mechanical joints. Its viscous, paste-like consistency enables controlled application on vertical and horizontal surfaces and maintains coverage under high pressure and repeated movement.

Advantages

This thermal grease contains molybdenum disulfide as a solid lubricant additive, which enhances load-carrying capacity and reduces wear at contact points. The product provides stable mechanical adhesion and thermal support where conventional greases may fail to ensure effective heat transfer. The cartridge format enables convenient, metered dispensing and reduces contamination during application. The composition is formulated to remain in place under vibration and repeated mechanical stress.

Suitable for

• Sliding surfaces and guides on cranes and heavy lifting equipment
• Bearing contact points and plain bearings exposed to high loads
• Joints, pins and couplings requiring combined lubrication and heat dissipation
• Industrial machinery maintenance where reduced friction and thermal conduction are needed

Key specifications

• Form: grease-type thermal paste with paste-like viscosity suitable for vertical and horizontal application
• Additive: molybdenum disulfide for improved load-bearing and anti-wear properties
• Packaging: 400 ml cartridge for controlled dispensing
• Application surfaces: metal sliding surfaces, plain bearings, joints and pins
• Performance: maintains coverage under mechanical vibration and repeated movement

How to use

Prepare contact surfaces by cleaning away old lubricant, dirt and corrosion to ensure good adhesion and heat transfer. Load the 400 ml cartridge into a compatible dispenser or caulking gun and apply an even, thin film to the contact area or bearing surface. Reassemble components and run the equipment under light load initially to allow the paste to settle into contact points. Reapply according to observed wear, load conditions and routine maintenance intervals.

Usage recommendations

Use protective gloves and eye protection during application. Avoid contamination with water, solvents or incompatible lubricants. Store cartridges in a cool, dry place away from direct sunlight and sources of heat. For critical load-bearing or high-temperature applications, verify compatibility with component materials and inspect regularly for signs of displacement or excessive wear.