Plumbing Elbow 90° AKA PE 32 mm with 3/4" Male Thread (PE-57-232)

The AKA Plumbing Elbow 90° for 32 mm polyethylene pipe with a 3/4" male thread is a compact right-angle connector designed to join PE piping with standard threaded fittings. Intended for domestic and light commercial plumbing, this 90-degree elbow provides a sealed transition between a 32 mm PE line and a 3/4" threaded component without requiring complex adapters. It is suitable for low-pressure potable water, irrigation and heating system applications where a reliable change of direction is needed in a confined space.

Advantages

This 90° elbow combines a polyethylene pipe connection with a male threaded outlet to simplify installation between PE piping and threaded valves or fixtures. Its compact right-angle design reduces space requirements and minimizes bending stress on pipes. The material compatibility with PE systems ensures a corrosion-resistant joint suitable for water supply and irrigation. Using a direct threaded interface avoids additional unions and reduces potential leak points when fitted correctly.

Suitable for

• Domestic potable water distribution on low-pressure lines
• Garden and agricultural irrigation systems
• Low-pressure heating circuits and secondary loops
• Connections to valves, taps or manifolds with 3/4" female thread

Key specifications

• Pipe connection: polyethylene (PE) for 32 mm nominal pipe
• Thread type: 3/4" male thread compatible with standard 3/4" female fittings
• Orientation: 90° elbow for right-angle change of direction
• Typical application pressure: suitable for low-pressure water and heating systems (follow system specifications)
• Material characteristics: designed for use with PE piping; corrosion-resistant and suitable for potable water when installed per local codes

How to use

Prepare the 32 mm PE pipe by cutting squarely and ensuring the pipe end is clean and free of burrs. Insert the PE pipe into the elbow connection according to the manufacturer's recommended insertion depth and secure using the appropriate mechanical compression or fusion method specified for PE systems. Thread the 3/4" male end into the corresponding 3/4" female fitting, using suitable thread sealant or tape if required by the installation standard. Tighten to the recommended torque to obtain a leak-free joint without over-stressing the components.

Usage recommendations

Verify compatibility with the system's pressure rating and local plumbing codes before installation. Use recommended tools and installation methods for PE piping (mechanical fittings or electrofusion where applicable) and apply suitable thread sealing materials on the 3/4" connection. Periodically inspect the joint for leaks after initial pressurization and during routine maintenance.