JBL speakers and headphones for pure and deep sound!
In cart {{totalProductsCount}} item(s)
Your cart is empty
Power supply Akyga AK-ND-44 19V 6.3A 120W for laptops, 5.5×2.5 mm plug, indoor, black
Akyga AK-ND-44 is a 120W indoor power supply designed for laptops requiring 19V and up to 6.3A. Encased in a black ABS housing, the adapter delivers stable DC power through a 5.5×2.5 mm barrel plug and accepts a wide AC input range of 100–250V. The unit includes a 1.2 m output cable with an integrated ferrite core to reduce high-frequency interference and improve signal integrity. Built-in protection circuits and compliance with CE, FCC, RoHS and REACH standards make this adapter suitable as a replacement or spare power source for compatible portable devices.
The AK-ND-44 features multiple hardware protections (OVP, OTP, OPP, SCP and OCP) to prevent damage from over-voltage, over-temperature, over-power and short-circuit conditions. Soft-start technology reduces inrush current during device startup, improving safety for both the adapter and the connected laptop. The ferrite core on the cord suppresses electromagnetic noise. The compact black ABS enclosure and industry-standard 5.5×2.5 mm plug ensure physical durability and wide compatibility with supported laptop models.
Verify that your laptop requires a 19V/6.3A input and that the 5.5×2.5 mm plug fits the device socket. Connect the adapter to mains power (100–250V) using a suitable mains lead, then insert the DC plug into the laptop power jack. Allow the adapter to stabilise during initial connection; soft-start circuitry limits inrush current. Monitor charging status on the laptop and disconnect from mains before unplugging the DC connector if the device manual recommends doing so.
Use the adapter indoors on a flat, well-ventilated surface and avoid covering it during operation. Keep the connector and cable free of excessive bends and protect the cord from mechanical damage. Replace the adapter if the housing shows visible damage, unusual noise, or overheating. Confirm device compatibility before use — the adapter is dedicated to certain Fujitsu-Siemens, HP/Compaq and Toshiba models and should be matched with devices that accept 19V/6.3A via a 5.5×2.5 mm plug.
{{highlightedFeature.featureTitle}}:
{{getProductFeatureValueById(product, highlightedFeature.featureId)}}
{{ productComparisonGenerationError }}