Steel Pipe Almeva PCTube 28 x 1.2 mm, 3 m (DWZ)

Almeva PCTube steel pipe with a nominal outer diameter of 28 mm, wall thickness 1.2 mm and length 3 m (DWZ) is a rigid metal conduit intended for flue, ventilation and exhaust applications. Manufactured by Almeva from steel with corrosion-resistant surface treatment, this straight pipe provides stable geometry and dimensional accuracy for joining with compatible fittings and connectors in residential and light-commercial systems. The product name Steel Pipe Almeva PCTube 28 x 1.2 mm, 3 m (DWZ) reflects its core physical characteristics and typical installation use.

Advantages

The pipe offers consistent wall thickness and straightness for reliable sealing and simple alignment during installation. Its steel construction ensures mechanical strength and resistance to deformation under typical operating conditions in ventilation and flue systems. The surface treatment provides enhanced protection against corrosion in indoor environments, increasing service life compared with untreated metal ducts. The 3 m length reduces the number of joints required on longer runs, improving flow performance and reducing potential leakage points.

Suitable for

• Domestic and light-commercial flue and chimney flue sections that require a rigid metal pipe
• Ventilation ducts for moving air between rooms or to the exterior
• Exhaust systems where a steel conduit is needed for heat or particulate resistance

Key specifications

• Outer diameter: 28 mm
• Wall thickness: 1.2 mm
• Length: 3 m
• Material: steel with corrosion-resistant surface finish
• Product type: straight metal pipe for flue, ventilation and exhaust use

How to use

Select compatible fittings and connectors designed for a 28 mm outer diameter pipe and ensure mating parts match the pipe wall thickness for correct sealing. Measure and cut the pipe to the required length using appropriate metal-cutting tools, then deburr cut edges to avoid damage to gaskets or seals. Assemble pipe sections with approved connectors, clamps or sealing collars following manufacturer guidance for the full system. Ensure joints are adequately supported and secured to maintain alignment and to prevent undue stress on connections.

Usage recommendations

Inspect the pipe and fittings for any damage prior to installation and avoid external exposure to highly corrosive environments unless additional protection is applied. For flue applications, verify compatibility with appliance requirements and local building codes; maintain required clearances and follow combustion appliance manufacturer instructions. Use appropriate personal protective equipment when cutting and handling steel pipe.