Pipe clamp ALPAR U200 for round pipes 45–70 mm, adjustable mounting bracket

ALPAR U200 pipe clamp for round pipes 45–70 mm is an adjustable mounting bracket designed to secure plumbing, HVAC, and conduit installations. The clamp accepts pipe diameters in the 45 to 70 mm range and provides a stable mechanical connection to walls, beams, or other structures. Its adjustable design allows adaptation to slight variances in pipe size and installation tolerances while reducing pipe movement and vibration.

Advantages

The adjustable bracket design offers flexibility for a range of pipe diameters without the need for multiple fixed-size clamps. Constructed for stable fixation, the clamp helps limit lateral movement and vibration transmission along the pipeline. Its configuration permits direct attachment to building structures, enabling neat routing of pipes and easier alignment during installation. The simple, robust form factor supports long-term mechanical stability in residential and commercial installations.

Suitable for

• Securing round water supply and drainage pipes with diameters between 45 and 70 mm
• Mounting HVAC ducts and refrigerant lines where pipe support is required
• Fixing electrical conduits or protective tubing in mechanical rooms and industrial settings
• Supporting piping runs on walls, ceilings, or steel structures to reduce vibration and movement

Key specifications

• Compatible pipe diameter range: 45–70 mm
• Adjustable bracket design for fine sizing and alignment
• Intended for wall, ceiling, or structural mounting
• Mechanical fixation to limit pipe movement and vibration
• Suitable for plumbing, HVAC and conduit applications

How to use

Position the clamp around the pipe within the 45–70 mm range and adjust the bracket until the pipe is held firmly but without excessive compression. Mark and prepare the mounting surface, then fasten the clamp securely to the wall or structure using suitable anchors or bolts for the substrate. Ensure alignment of adjacent clamps to maintain consistent slope and support intervals. Check that the clamp does not deform the pipe or obstruct fittings and that vibration is reduced after installation.

Usage recommendations

Select anchors or fixings appropriate to the mounting material and expected load. For long pipe runs, install clamps at regular intervals to prevent sagging and to control thermal expansion. Avoid overtightening the clamp to prevent damage to the pipe; if insulation is present, ensure the clamp holds the insulated assembly without compressing insulation excessively.