Thermal pad Alphacool Core 6.2 W/m·K 100x100x3 mm

Alphacool Core thermal pad with thermal conductivity of 6.2 W/m·K and dimensions 100 x 100 x 3 mm provides reliable heat transfer for electronic components that require effective dissipation of waste heat. The silicone-based pad has a density of 3.1 g/cm³ and is electrically non-conductive, making it suitable for a wide range of cooling applications including graphics card VRAM and voltage converters as well as components in game consoles and other electronics.

Advantages

The silicone Soft heat conduction material offers low hardness and natural stickiness, allowing the Core thermal pad to conform to surface irregularities and improve thermal contact between components. Its special material composition reduces the risk of silicone bleeding, which extends usable life compared with many conventional thermal pads. The product’s electrical insulation and stable thermal performance make it versatile for diverse electronic cooling tasks.

Suitable for

• VRAM and voltage converters on graphics cards
• Electronic components in PlayStation and Xbox consoles
• Motherboards, power supplies and memory modules
• Servers, telecom equipment, access points and notebooks
• Mobile devices and electric vehicle electronics

Key specifications

• Brand: Alphacool
• Model / MPN: 13406
• EAN: 4250197134064
• Thermal conductivity: 6.2 W/m·K
• Dimensions: 100 x 100 x 3 mm
• Density: 3.1 g/cm³
• Material: silicone-based, electrically non-conductive

How to use

Cut the thermal pad to the required size if necessary, remove any protective liners, and place it between the heat-generating component and the heatsink or contact surface. Ensure both surfaces are clean and free of dust or grease before application. Apply moderate pressure so the pad conforms to surface unevenness and establishes full contact; avoid stretching or tearing the material.

Usage recommendations

For best results, verify compatibility with component spacing and confirm that the 3 mm thickness provides the intended thermal gap. Replace the pad if it shows visible degradation or reduced contact effectiveness. Do not use on live electrical contacts where manufacturer instructions prohibit insulating materials.