Bending kit Alphacool 90372 Black

The Alphacool 90372 Black bending kit is designed for creating precise three-dimensional bends in 16 mm Ø cooling tubes used in custom PC liquid-cooling systems. It provides a robust, compact solution to set and repeat horizontal angles for tubing runs, helping to achieve clean, professional-looking layouts.

Advantages

This bending kit supports two versions for three-dimensional bending and is made to fit tubes with a 16 mm outer diameter. The horizontal angle is continuously adjustable across a 180° range with a 1° scale for accurate angle selection. Adjustment is secured by M4 screws that are loosened and tightened with the included hexagon socket, ensuring repeatable and stable settings.

Suitable for

• Bending 16 mm Ø soft or hard cooling tubes in custom PC watercooling loops
• Creating precise angle transitions in compact or complex tubing layouts
• Professional and enthusiast builds requiring repeatable tube bends

Key specifications

• Compatible tube outer diameter: 16 mm
• Angle adjustment range: 180° horizontal
• Angle resolution: 1° scale
• Fastening: back M4 screws (adjustable with included hexagon socket)
• Versions: two versions available for 3-dimensional bending

How to use

Select the correct version of the kit that corresponds to the 16 mm Ø tube you intend to bend. To set the horizontal angle, slightly loosen the rear M4 screws with the supplied hexagon socket, move the bending guide to the desired position using the 1° scale for accuracy, then retighten the M4 screws to lock the setting. Repeat the process for additional bends or when changing angle positions.

Usage recommendations

Use the included hexagon socket and tighten M4 screws evenly to avoid slippage; always verify the selected version matches the tube diameter before bending to prevent damage to the tube or fitting errors.