Seal ring AMICA SIMERING 25x47x11 AMICA — oil seal 25×47×11 mm

AMICA SIMERING 25x47x11 is a circular oil seal designed for axial sealing between shafts and housings. With outer diameter 47 mm, inner diameter 25 mm and cross-section thickness 11 mm, this seal prevents oil and lubricant leakage and blocks ingress of dust and moisture. The design is intended for use in repair and maintenance of household appliances and small machinery that require a compact, reliable sealing element in this size.

Advantages

The oil seal provides consistent sealing performance under moderate rotational speeds and typical appliance operating conditions. Its compact dimensions allow easy replacement in confined spaces while maintaining a tight barrier against lubricant loss. The lip design reduces wear on the shaft and resists common contaminants, contributing to longer service intervals when installed and maintained correctly.

Suitable for

• Repair and maintenance of household appliances (motors, pumps)
• Small machinery and garden equipment
• Replacement of worn or damaged shaft seals in compact assemblies
• Applications requiring oil and lubricant retention with protection from dust and moisture

Key specifications

• Inner diameter: 25 mm
• Outer diameter: 47 mm
• Thickness / cross-section: 11 mm
• Seal type: radial oil seal for axial sealing of shaft and housing
• Typical application environment: moderate rotational speeds and household appliance conditions

How to use

Before installation, clean the shaft and housing bore to remove debris and old lubricant. Inspect mating surfaces for scratches or burrs that could compromise the seal. Press the oil seal squarely into the housing bore using even force; avoid tilting to prevent lip damage. Ensure the sealing lip faces the lubricant side and apply a light coating of compatible lubricant to the lip and shaft before final assembly. After installation, rotate the shaft by hand to verify smooth movement and correct seating of the seal.

Usage recommendations

Store the seal in a dry, cool place away from direct sunlight and ozone sources. Replace seals showing hardening, cracking, or visible deformation. For best results, use a seal material and lubricant compatible with the operating temperature and fluid used in your equipment.