Halogen headlight bulbs H1 12V 55W Amio LumiTec SILVER +100% DUO BOX

The Amio LumiTec SILVER H1 12V 55W DUO BOX contains two halogen headlight bulbs designed for vehicles with H1 fittings. These bulbs provide the standard H1 power rating of 55 watts at 12 volts and have a silver-coated appearance. They are intended for replacement of front low-beam or high-beam H1 lamps to restore proper road illumination and support improved visibility compared with aged or worn bulbs.

Advantages

Amio LumiTec SILVER H1 bulbs combine conventional halogen technology with a silver coating to deliver a focused beam pattern compatible with H1 reflectors and projectors. The DUO BOX packaging provides a matched pair for simultaneous replacement on both sides of the vehicle, ensuring consistent colour temperature and light output. Designed for straightforward, direct-fit installation, these bulbs offer a balance between standard illumination performance and a bright, neutral-looking beam.

Suitable for

• Replacement of front low-beam H1 bulbs in compatible vehicles
• Replacement of front high-beam H1 bulbs where specified
• Restoring even illumination when one or both original bulbs are dim or failed
• Drivers seeking a matched pair for side-by-side bulb replacement

Key specifications

• Type: H1 halogen headlight bulb
• Rated voltage: 12 V
• Power: 55 W
• Light source technology: halogen
• Finish: silver-coated envelope for a neutral beam appearance
• Packaging: two bulbs in a duo box

How to use

Before replacing bulbs, consult the vehicle owner’s manual to confirm H1 socket compatibility and follow manufacturer safety instructions. Switch off the ignition and allow existing bulbs to cool. Access the headlight housing according to vehicle-specific procedures, remove the old H1 bulb by disconnecting the electrical connector and release clips or twist base as required, then install the Amio LumiTec SILVER H1 by handling the glass envelope only with a clean cloth or gloves to prevent oil contamination. Secure the bulb, reconnect the electrical connector, and test the beam alignment and functionality before completing reassembly.

Usage recommendations

For reliable performance and longevity, avoid touching the bulb glass with bare fingers and check headlight alignment after installation. Replace bulbs in pairs to maintain uniform light output and colour tone across both headlights. If you require a different beam colour or higher luminous flux, consult compatible alternatives and verify legal requirements for road use in your region.