Halogen Bulb Set Amio H7 12V 55W LumiTec LIMITED +130% DUO BOX

Set of Amio halogen H7 automotive bulbs, 12V 55W, LumiTec LIMITED +130% DUO BOX is a pair of single-filament headlight bulbs intended for use in compatible vehicle headlamp assemblies. The bulbs provide the factory-standard nominal voltage and power rating (12V, 55W) while the LumiTec LIMITED designation indicates an increased light output as stated in the product name. Supplied as a duo pack, the set is intended for direct replacement of standard H7 bulbs in cars that accept the H7 fitting.

Advantages

The Amio H7 bulbs maintain standard electrical and mechanical compatibility with H7 sockets, ensuring straightforward installation without vehicle modifications. The duo pack ensures matched light characteristics on both sides of the vehicle and simplifies replacement timing. The LumiTec LIMITED marking denotes a manufacturer-stated increase in luminous performance compared with unstated baseline H7 bulbs, enabling improved forward illumination when installed in correctly aligned and compatible headlamp systems.

Suitable for

• Replacement of worn or non-functioning H7 headlight bulbs in compatible cars
• Simultaneous replacement on both sides to maintain symmetrical light output
• Drivers seeking increased forward illumination within the product's stated +130% output

Key specifications

• Bulb type: H7 single-filament halogen
• Nominal voltage: 12 V
• Nominal power: 55 W
• Pack contents: duo (2 bulbs)
• Light technology: halogen with LumiTec LIMITED enhanced output

How to use

Ensure the vehicle ignition is off and the headlight switch is in the off position before beginning. Access the headlight bulb holder according to the vehicle manufacturer's procedure, remove the existing H7 bulb by releasing the retainer or connector, and disconnect the electrical plug. Handle the new bulbs by the base without touching the glass envelope; install each Amio H7 bulb into the socket, secure the retainer, and reconnect the electrical plug. After installation, check beam alignment and adjust headlights if necessary to ensure correct pattern and avoid glare to other road users.

Usage recommendations

Use these bulbs only in headlamp systems designed for H7 12V 55W halogen bulbs. Replace bulbs in matched pairs when possible to preserve uniform light output. Avoid touching the glass with bare hands; oils from skin can shorten bulb life. After fitting, verify headlight alignment and compliance with local lighting regulations.