Halogen/xenon replacement bulb Amio H7M 4300K — xenon filament bulb for vehicle headlights

The Amio H7M 4300K xenon filament bulb is a halogen-style replacement designed for vehicle headlight systems that accept an H7 single-filament lamp. With a color temperature of 4300K, this bulb produces a neutral white light similar to xenon tone, delivering improved road illumination and clear color rendering compared with standard halogen lamps. The H7M design focuses output for reflector and projector housings that require an H7 fitting and single filament configuration.

Advantages

This replacement bulb provides a xenon-like color temperature of 4300K while remaining compatible with standard 12V automotive electrical systems. The single-filament H7M construction ensures correct beam pattern in compliant headlight reflectors and projectors. Its neutral white light improves visibility and contrast at night without altering the vehicle's original lighting geometry.

Suitable for

• Drivers seeking an H7-compatible bulb with a xenon-like 4300K color tone
• Vehicles with reflector or projector headlight housings designed for single-filament H7 lamps
• Replacement of worn or dim factory halogen H7 bulbs

Key specifications

• Type: single-filament automotive headlight bulb (H7M style)
• Color temperature: 4300K (neutral white, xenon-like)
• Intended use: low beam or high beam where H7 single-filament is specified
• Operating voltage: automotive 12V systems
• Compatibility: H7 socket fittings in vehicles

How to use

Before installation, ensure the vehicle ignition is off and the headlight switch is disabled. Access the headlight housing according to the vehicle manufacturer's instructions, remove the old H7 lamp by disconnecting the electrical connector and releasing the retaining clip or socket, and install the Amio H7M 4300K by securing it in the correct orientation for the housing. Reconnect the electrical connector and verify the bulb is seated correctly. After installation, test the beam pattern and aim if required to ensure correct alignment and avoid glare to other road users.

Usage recommendations

Handle the bulb by its base and avoid touching the glass envelope with bare hands; oils from skin can reduce bulb life and cause hot spots. Replace bulbs in matched pairs where possible to maintain even illumination. If beam pattern appears distorted after fitting, check seating and adjust headlight aim according to vehicle specifications.