Halogen Bulb Set Amio HB3 (9005) 12V 60W LumiTec LIMITED +130% DUO BOX

Set of Amio halogen headlight bulbs in HB3 (9005) fitment, rated 12V 60W with LumiTec LIMITED coating claiming +130% improved light. The DUO BOX contains two identical bulbs intended as direct replacements for compatible halogen lamps used in vehicle low or high beam circuits that accept HB3 sockets. These bulbs are designed to restore or enhance roadway illumination while maintaining the same electrical and mechanical fit as standard 12V 60W halogen units.

Advantages

The LumiTec LIMITED coating is applied to the bulb envelope to shift and concentrate visible light output, which the manufacturer specifies as up to +130% increased light compared with a reference standard halogen lamp. Because the bulbs keep standard 12V electrical characteristics and HB3 base dimensions, installation requires no wiring modifications or adapters. The DUO BOX format supplies a matched pair for both sides of the vehicle, helping to maintain consistent beam pattern and colour between left and right headlights.

Suitable for

• Replacement of worn or failed HB3 (9005) halogen headlight bulbs
• Drivers seeking increased forward illumination within halogen specification limits
• Use in vehicles that accept 12V 60W HB3 (9005) bulbs for low or high beam
• Applications requiring a matched pair to ensure uniform beam performance

Key specifications

• Bulb type: Halogen
• Fitment/base: HB3 (9005) compatible
• Rated voltage: 12 V
• Rated power: 60 W
• Optical treatment: LumiTec LIMITED coating for increased light output
• Pack configuration: DUO BOX – two matching bulbs

How to use

Ensure the vehicle ignition is off and the headlight circuit is cool before replacing bulbs. Remove the headlight housing cover or bulb holder according to the vehicle manufacturer’s instructions, unplug the electrical connector from the old bulb, and remove the bulb from the socket. Insert the Amio HB3 (9005) bulb into the socket with care to avoid touching the glass envelope with bare hands; oils from skin can reduce bulb life. Reconnect the electrical connector, secure the bulb holder or cover, and test the lights for correct operation and beam alignment.

Usage recommendations

Do not exceed the vehicle’s approved wattage or alter the headlamp reflector or lens. Replace bulbs in matched pairs to preserve symmetrical beam pattern and colour. If beam alignment or glare for other road users is observed after installation, have the headlamp aim checked and adjusted by a qualified technician.