Halogen bulb Amio H1 12V 55W for automotive headlights, single filament

The Amio H1 halogen bulb is a 12V 55W single-filament lamp designed for automotive headlight applications. Intended as a direct replacement for vehicles that require H1 specification bulbs, it delivers standard halogen illumination for night driving and daily use. The bulb fits H1 sockets and provides a consistent light output and color temperature typical for halogen headlamps, allowing straightforward installation and compatibility with existing headlight assemblies.

Advantages

The single-filament design offers reliable performance for low- or high-beam circuits depending on the vehicle's headlight system. The bulb's compact shape and standardized base ensure ease of installation and secure seating in H1 sockets. As a conventional halogen lamp, it operates on 12V electrical systems and provides predictable luminous output and beam pattern when installed in compatible housings. The Amio H1 is suitable for vehicles where specification and fitment are the primary selection criteria.

Suitable for

• Replacement of burned-out H1 automotive headlight bulbs
• Vehicles with 12V electrical systems requiring 55W single-filament H1 lamps
• Maintaining standard halogen beam pattern in original headlight reflectors
• Use in low- or high-beam circuits where single-filament H1 bulbs are specified

Key specifications

• Rated voltage: 12 V
• Rated power: 55 W
• Filament: single
• Bulb type: halogen
• Base/socket: H1 standard
• Intended use: automotive headlight illumination
• Typical light source characteristics: halogen color temperature and luminous output suitable for standard headlamp reflectors

How to use

Ensure the vehicle ignition is switched off and the headlight circuit is cool before beginning. Access the headlamp assembly according to the vehicle manufacturer's instructions, remove the protective cover or connector if present, and carefully disconnect the electrical connector from the old bulb. Avoid touching the glass envelope of the new halogen bulb with bare fingers; handle by the base or use a clean cloth or gloves. Insert the Amio H1 bulb into the H1 socket, ensuring correct orientation and secure seating, then reconnect the electrical connector and replace any protective covers. Test the headlight to confirm correct operation and beam alignment.

Usage recommendations

Replace bulbs in pairs when possible to maintain uniform light output and color between left and right headlamps. If the bulb glass is accidentally touched, clean with isopropyl alcohol and a lint-free cloth before installation. Verify that the headlamp housing and wiring are in good condition and that the vehicle's headlamp alignment is within specification after replacing bulbs.