Amio Dark Black window tint film, size 0.75 x 3.00 m with 15% visible light transmission, is a self-adhesive coating designed for automotive and architectural glass. The single-sheet film is intended to reduce glare, increase visual privacy and lower solar heat gain on side and rear car windows, as well as on residential or office glazing. The product is supplied as a cut-to-fit roll suitable for DIY trimming or professional installation.
Advantages
The film delivers consistent light reduction with a measured 15% visible light transmission, providing effective glare control and improved privacy without fully darkening the interior. Its self-adhesive backing allows bubble-free application when installed correctly and reduces dependence on tapes or liquid adhesives. The dark black finish offers a uniform appearance on glass surfaces and helps limit solar heat penetration to improve interior comfort and reduce cooling load.
Suitable for
- Automotive side and rear windows for privacy and glare reduction
- Home windows where reduced sunlight and enhanced privacy are required
- Office glazing to minimize glare on screens and moderate daylight
- Do-it-yourself retrofit projects and professional window tint installations
Key specifications
- Material: self-adhesive window tint film with dark black finish
- Size: 0.75 x 3.00 metres (single roll)
- Visible light transmission (VLT): 15%
- Intended surfaces: flat or gently curved glass (automotive and architectural)
- Application type: wet or dry installation methods compatible with adhesive-backed films
How to use
Prepare the glass surface by cleaning thoroughly with a non-abrasive cleaner and removing all dust, grease and old adhesive residues. Measure the window and cut the film to the required dimensions, leaving a small margin for trimming. For wet installation, spray a soapy water solution onto the glass and the adhesive side of the film, position the film on the glass, then squeegee from the centre outward to expel water and air. For dry installation, align and apply the film carefully, using a squeegee to smooth the surface and avoid trapping air. Trim excess film with a sharp blade and allow the film to settle and the adhesive to cure according to ambient temperature and humidity.
Usage recommendations
For best results, install the film in a dust-free environment at moderate temperatures. If applying to automotive windows, follow local regulations regarding visible light transmission limits. Consider professional installation for complex curves or full-coverage jobs to ensure a smooth, durable finish.
