Antari FT-6 Fluid Hose 6 mm x 50 cm model 51702966 for fog and fluid transfer

Antari FT-6 Fluid Hose is a 6 mm inner diameter, 50 cm long hose designed for safe transfer of fog and fluid in professional and consumer fogging systems. Intended as a connection between fluid tanks, pumps and fog machines, this flexible hose supports transfer of glycol- and water-based fog fluids and is suitable as a replacement or spare part in stage, DJ and event setups.

Advantages

The hose features a uniform 6 mm internal diameter for steady fluid flow and a 50 cm length that balances flexibility with reach. Constructed for compatibility with common fog machine fittings and pumps, it offers a simple, practical solution for replacing worn or damaged tubing. Its flexible construction helps reduce kinks and allows routing in confined spaces while maintaining reliable fluid delivery.

Suitable for

• Connecting fluid tanks to pumps in fog and haze machines
• Replacement tubing for stage, DJ and event fog equipment
• Short-run fluid transfer where a 6 mm inner diameter is required
• Maintenance kits and spare-parts inventories for event technicians

When it may not be suitable

This hose is intended for glycol- and water-based fog fluids and is not specified for aggressive chemicals, oils or solvents. It is a short-length tubing solution; applications requiring long runs or larger internal diameters may need alternative hoses. Ensure fittings on your equipment match the 6 mm internal diameter before use.

Key specifications

• Inner diameter: 6 mm
• Length: 50 cm
• Material: flexible tubing compatible with water- and glycol-based fog fluids
• Primary use: fluid transfer for fog/haze machines and related pumps

How to use

Cut or inspect the hose ends to ensure clean, straight connections. Slide hose clamps or push-fit connectors onto the fittings of the fluid tank, pump inlet, or machine nozzle, then firmly seat the hose onto the barb or connector. Tighten clamps if applicable to prevent leaks. Route the hose to avoid sharp bends and abrasion points; periodic inspection for blockages or wear will help maintain reliable operation.

What to consider before purchase

• Confirm that a 6 mm inner diameter matches your equipment fittings.
• Verify the 50 cm length provides sufficient reach for your setup.
• Check compatibility with glycol- or water-based fog fluids used in your system.
• Consider whether you need additional clamps or connectors for secure attachment.

Usage recommendations

For consistent performance, use with clean fog fluid, avoid sharp bends or kinks, and replace the hose if stiffness, discoloration or cracking appears. When installing, use appropriate clamp sizes and inspect connections before operation to prevent leaks and ensure uninterrupted fluid transfer.